Car Radio Unlocking

Waspie_2

Thanks for trying to help, much appreciated. Will wait to see if anyone else has some ideas then...

:beer:

RegWorts

Waspie wrote: »

Yes it displayed code, when I pressed 5 nothing happened display never changed it stayed with 7199 on display...?

First thing is to make sure you have quoted the correct M Serial Number for the code calculation ( Read it off the radio sticker)

If correct then

Anything else on the display?
WAIT?
CODE?
- - - -
LOCK10
LOCK13
Any numbers?
Have you entered any wrong codes previously?

If you have entered wrong codes, leave the radio switched ON UNDISTURBED for a couple of hours and it should reset.

Then re-try the code .

mikistrange

Hi all
I have a Ford 6000 CD RDS EON
My car's just been to the garage and the radio's been reset.
My serial number is: M153343
I hope someone can help.
Thanks in advance.

johny_blade

RegWorts wrote: »

LOCK13 normally means that the radio is well and truly locked and can only be unlocked by taking it into your Main Ford Dealer or a professional Radio Decode Specialist who will unlock it using electronic reset equipment.

However I`ve been told that if you have the RED Security Ignition Key then email restoredclassic@aol.com who are looking to try out a new reset method (for free)

If you don`t have this red key , then it might just be cheaper to buy a replacement radio with a code from Ebay or similar.

Hi Regworts,or anyone else that knows,does locked 10 mean the same?i have a ford 6000cd and i have the code....cheers

Waspie_2

RegWorts wrote: »

First thing is to make sure you have quoted the correct M Serial Number for the code calculation ( Read it off the radio sticker)

If correct then

Anything else on the display?
WAIT?
CODE?
- - - -
LOCK10
LOCK13
Any numbers?
Have you entered any wrong codes previously?

If you have entered wrong codes, leave the radio switched ON UNDISTURBED for a couple of hours and it should reset.

Then re-try the code .

I will try the last part & then re-try the code again & see what happens.

Thanks regWorts.

wallbash

mikistrange

code is 5830

daddydoughnut

Hi I have a ford focus 6000cd The car must have had a replacement radio as the code and serial number do not correspond to what is in the manual. the serial number of the radio is M268501. would be greatly appreciated if a code could be provided

Thanks

wallbash

daddydoughnut try 7948

daddydoughnut

wallbash Much appreciated , many thanks for the quick fix I now have sounds again .

RegWorts

johny_blade wrote: »

Hi Regworts,or anyone else that knows,does locked 10 mean the same?i have a ford 6000cd and i have the code....cheers

For security reasons LOCK10 solutions are not given out on this open forum.

Too many car thieves and others would only take advantage..