We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Bathroom extractor / loft
Options
Comments
-
sneekymum wrote:. A properly insulated loft is not a good place to store things anyway.
I agree with that last sentence - but some people have little choice. And as long as the loft area is well ventilated - and some appropriate selection made of the type of items stored (tools - no worse than in a garage, for example) - there shouldn't be a real problem.
But I've never encountered ceiling joists sized only to take the weight of plasterboard! And a good job, otherwise my 100 gallon cold water storage tank would have joined us in bed. Admittedly most storage tanks aren't quite that size - but even so even the average weighs, when full, considerably more than a few sheets of plasterboard.
And your premise would mean that anyone converting their loft would face the task of replacing all the joists and upper ceilings first??If you want to test the depth of the water .........don't use both feet !0 -
The cracks in my bedroom ceiling testify to the fact that lofts are not a good place to store stuff but has as been pointed out,sometimes we have no choice.
As for who to fit the extractor fan question.I have two electricians i call on for doing my electrical work on jobs.One of them would quite happily do the whole thing including chopping/cutting out the hole but the other would expect me to do all the donkey work and him to just do the wiring.Like it's been said,bit of a grey area but my first port of call would be to ask some electricians if they would undertake the job.0 -
Hello, digging up this old one I'm afraid, it's looking all being well that this will be work which we will require carrying out and I was wondering if anybody can recommend anyone in the Leeds area to contact for this work?
Thank you0 -
Hi there i apologise for being new to this but i couldn't see an icon to post a new thread so here goes.
I have recently installed a bathroom extractor, but cannot vent it to the soffit because it is Asbestos!. However regs say that you cannot drill existing asbestos, so how do I get around driilling this hole to vent my soffit? Can i get a qualified asbestos driller to do this? As this is the easiest form of extraction?
IF by some unlucky event they say i need to put a hole through the wall, unfortunately, my bathroom is surrounded by a Garage on one side and a conservatory and bedrooms. It seems that the only way is up apart from the soffit approach. Also as my existing soffits are not vented, is there a rule about putting new vented soffits in or should they remain sealed.0 -
Phil_Jones wrote: »I have recently installed a bathroom extractor, but cannot vent it to the soffit because it is Asbestos!. However regs say that you cannot drill existing asbestos, so how do I get around driilling this hole to vent my soffit? Can i get a qualified asbestos driller to do this? As this is the easiest form of extraction?
IF by some unlucky event they say i need to put a hole through the wall, unfortunately, my bathroom is surrounded by a Garage on one side and a conservatory and bedrooms. It seems that the only way is up apart from the soffit approach. Also as my existing soffits are not vented, is there a rule about putting new vented soffits in or should they remain sealed.
Option 2: Run pipework through garage as least likely to cause damage to existing finishes and final product would be acceptable (compared to vent pipework running through the conservatory or bedroom)A house isn't a home without a cat.
Those are my principles. If you don't like them, I have others.
I have writer's block - I can't begin to tell you about it.
You told me again you preferred handsome men but for me you would make an exception.
It's a recession when your neighbour loses his job; it's a depression when you lose yours.0 -
Thanks for the input..
I've thought about drilling through the PVC fascia, as I've measured it and I have got enough for a 105mm drill/hole cutter.:j0 -
Phil,
Do you know whether your soffits are asbestos insulating board or asbestos cement? To clarify things, the regulations surrounding asbestos do not stop a homeowner from working on asbestos, but you should look after yours and otehr peoples health.
I work in the industry on the consultancy side and will be more than willing to answer any questions you have.0 -
I know this is an old thread but can anyone give me some advice.
about to let a property that has a small upstairs toilet with small corner handbasin - cold water only. Been told that we need to ventilate the room but there is no window and its a 3 storey property which makes going through the wall a no go.
With it being cold water only, do Ineed to vent to the outside or wll it be ok just into attic?
thanks in advance0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 351.1K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244.1K Work, Benefits & Business
- 599K Mortgages, Homes & Bills
- 177K Life & Family
- 257.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards