We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
No hot water following power cut? :-(
Options
Comments
-
the black things have the fuse level on them
the first three are 15 and 20''s
the second lot are 5-30's
and it says 'turn of before removing fuses':eek:0 -
Money_Grabber13579 wrote: »Both the big switches? I only see one and I certainly wouldn't turn that on since that didn't go off on its own accord!:p
I can make out on the 1st blue fuse "7" (I think) but not whats on the other blue fuses. Maybe that's for the economy 7 heaters, so that would rule that one out. Although without knowing what's on the others, there might be a different code used!
i didnt catch it on the photo - to the right hand side of the set of 8 black things there is another switch which says ON (apologies!!)0 -
suewiththeblues wrote: »i didnt catch it on the photo - to the right hand side of the set of 8 black things there is another switch which says ON (apologies!!)
That'll probably be your master switch then. Switch it off, and all the power in the house will go off!Northern Ireland club member No 382 :j0 -
It might be an idea if you are going to be there for some time to invest in replacement fuses. A doddle to do in the dark unlike replacing actual fuse wire. You get one of each different colour from your local DIY store keep them by your fuse box & you're set for whatever blows, you just pull the full thing out & put the new one in - you can keep trying until you get the right one! I had a lot of trouble in this house at first because some DIYer had taken off plugs & lightswitches to decorate & not put them together properly.0
-
Money_Grabber13579 wrote: »Both the big switches? I only see one and I certainly wouldn't turn that on since that didn't go off on its own accord!:p
I can make out on the 1st blue fuse "7" (I think) but not whats on the other blue fuses. Maybe that's for the economy 7 heaters, so that would rule that one out. Although without knowing what's on the others, there might be a different code used!
oh gosh i am a nitwit - have looked again!!
the numbers under the first black things go 4,3,2,1
the numbers under the 2nd box of black things goes 8,7,6,5,4,3,2,10 -
suewiththeblues wrote: »the black things have the fuse level on them
the first three are 15 and 20''s
the second lot are 5-30's
and it says 'turn of before removing fuses':eek:
If you look underneath the fuses themselves though, there is letters or numbers which have been inscribed. From what I can see, they seem to go either B or 8, then 7, then maybe B again? If you have the correct sequence, then you should have a map which tells you exactly which part of the house each fuse is for, if you see what I mean!Northern Ireland club member No 382 :j0 -
suewiththeblues wrote: »oh gosh i am a nitwit - have looked again!!
the numbers under the first black things go 4,3,2,1
the numbers under the 2nd box of black things goes 8,7,6,5,4,3,2,1
Yep those are the numbers!You should have a card somewhere in the house telling you what each fuse is for. Match the number against the card, and it'll tell you which circuit.
Now I would do this until someone else can clarify if it is advisable, but if it was me, I'd pull out each of the blue fuses in turn, and look and see if there is a split in the fuse wire. If there is, that's the problem fuse. Would anyone else advise this? (I'm not an electrician by the way, but this is what I used to do in my old house!)Northern Ireland club member No 382 :j0 -
-
If you can identify which fuse has gone i suppose you could pull one of the heater ones and use that fuse instead as a temporary fix (assuming the right fuse wire has actually been fitted). But don't go pulling any fuses without turning the main switches off.
Andy
Not unless you know what you're doing, and know what the fuse ratings are, and I don't think you should. These aren't the best of fuseboxes, an electrician would be a lot safer for you.0 -
oh you guys are geniuses! i wouldnt of even though of that! right i have the covers here ad your right it says what is what...
however!!! in the box that goes 4321 4=imms heater
and in the box that goes 8-1 3= imm heater
so is it one of them or both of them i should take out and put a new fuse in? (after turning the main switches off!)0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 351K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244K Work, Benefits & Business
- 598.9K Mortgages, Homes & Bills
- 176.9K Life & Family
- 257.3K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards