We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Laptop not connecting to Linksys WAG354 Wireless router!!

Hi,

I have a Toshiba Satellite Pro4600 with an inyernal wireless card. I am trying to connect it to my Linksys WAG354 wireless router. The laptop does appear to connect however only getting a connection status of "Limited or no connectivity" The note from computer is saying the problem occurres because the network did not assign a network address to the computer.

I have called Linksys but the indian call center were not much help! They said i should update the wirless driver for the Toshiba...i have done that but still same problem.

I am running windows XP. I have two other laptops connected to the WAS354 router and they are running fine.

Any advice would be much appreciated.
Filiss
«1

Comments

  • cheghead
    cheghead Posts: 849 Forumite
    Have you tried re-booting the router?
  • LionKing
    LionKing Posts: 446 Forumite
    Part of the Furniture Combo Breaker
    Switching it off and on....yes
    Filiss
  • cheghead
    cheghead Posts: 849 Forumite
    can you connect to the network using the IP address. If so you should be able to see if the router is connecting. From there you can generally re-boot/save to re-start the router. Not the same as just switching it on and off!
  • cheghead
    cheghead Posts: 849 Forumite
    Have you checked the network connection in My Network Places? You can click properties and then click Repair.
  • LionKing
    LionKing Posts: 446 Forumite
    Part of the Furniture Combo Breaker
    How do you conect to nework using IP address? Do i do this from the Toshiba laptop or do i need to configure the Linksys adaptor?

    I have tried the Repair option but does not fix
    Filiss
  • cheghead
    cheghead Posts: 849 Forumite
    LionKing wrote:
    How do you conect to nework using IP address? Do i do this from the Toshiba laptop or do i need to configure the Linksys adaptor?

    I have tried the Repair option but does not fix

    Most routers have a address like this (XX.X.X.X) which will probably be in the manual. Type the number into IE. This should bring up lots of network info and diagnostic stuff....hopefully!
  • pks00
    pks00 Posts: 559 Forumite
    when u switch off the router, you do not actually reset it. I have a linksys WRT54G, at the back (Im assuming yours is similar), there should be a reset button, probably need a screwdriver or something to press it. Check your manuals. That is how you are supposed to reset routers.

    I had very slow download speeds once, so slow it was worse than dialup. Not sure why, but a reset (like I have described) did the trick. Probably happened cos I was messing around with the settings.

    Someone with a similar experience
    http://www.helpwithwindows.com/WindowsXP/troub-13.html

    Also, once you got connectivity, just in case you have not set a password, do so, else you may find other people using your internet!!!
    :hello:

    Surviving A Day In The Office
    9am Switch on PC, 9.05am - Check Email, 9.10am - Download Virus, 9.30am - Call Helpdesk, 10am - Relax all day whilst engineer fixes problem!

    Shopping Tips
    Don't spend five pounds to dry clean a shirt. Donate it to the charity shop instead. They'll clean it and put it on a hanger. Next morning buy it back for two pounds.
  • ManAtHome
    ManAtHome Posts: 8,512 Forumite
    Part of the Furniture Combo Breaker
    You're not filtering MAC addresses are you? (in the Wireless Security tab on the Linksys I think).

    ps - maybe silly question, but is the security set up the same on the Tosh as the other 2 which work?
  • LionKing
    LionKing Posts: 446 Forumite
    Part of the Furniture Combo Breaker
    Hi,

    Have tried connecting to netwrok using IP. Not bringing up anything..."page cannot be displayed". Should i connect it via an Ethernet cable to help configure?

    I have tried the router rese button but no joy. The other laptops are working fine though! I have checked the status of the internal wireless card on the Tosh and it is working finr too. Why won't it connect though??
    Filiss
  • LionKing
    LionKing Posts: 446 Forumite
    Part of the Furniture Combo Breaker
    Also...when i hit the repair button, it cannot complete the "renewing your IP address" action
    Filiss
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.1K Banking & Borrowing
  • 253.5K Reduce Debt & Boost Income
  • 454.2K Spending & Discounts
  • 245.1K Work, Benefits & Business
  • 600.7K Mortgages, Homes & Bills
  • 177.4K Life & Family
  • 258.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.