We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
How much to fit Eibach lowering springs?
Options
Comments
-
goldspanners wrote: »stick up a picture of it when its done so we can see!
My car is seriously filthy at the moment, just not had a chance to clean it plus its been freezing outside!! Will try and do some before and afters!"He's a maniac, maniac that's for sure,
He will kill your cat and nail him to the door" :eek:
Murphys No More Pies Club Member #950 -
My car is seriously filthy at the moment, just not had a chance to clean it plus its been freezing outside!! Will try and do some before and afters!
yes that would be good.
both car and especially van are manky at the moment, i cleaned the van last friday and then when i got to work on monday you wouldnt think it had been washed for months....work permit granted!0 -
goldspanners wrote: »yes that would be good.
both car and especially van are manky at the moment, i cleaned the van last friday and then when i got to work on monday you wouldnt think it had been washed for months.
Yeah true...used to wash it every 2/3 weeks in summer but can't be arsed now as it will just get dirty 20 mins after I wash it :rotfl:"He's a maniac, maniac that's for sure,
He will kill your cat and nail him to the door" :eek:
Murphys No More Pies Club Member #950 -
Yeah true...used to wash it every 2/3 weeks in summer but can't be arsed now as it will just get dirty 20 mins after I wash it :rotfl:
me to, the focus is badly needing a day or so spent on it, inside and out cleaning it. then its underneath with some black paint and some high temperature black paint to tidy up the brake drum, if theres one thing i hate its rusty brake drum,theres no need for it. a good rub down and a few coats of paint,and adjust the shoes while im there....work permit granted!0 -
goldspanners wrote: »me to, the focus is badly needing a day or so spent on it, inside and out cleaning it. then its underneath with some black paint and some high temperature black paint to tidy up the brake drum, if theres one thing i hate its rusty brake drum,theres no need for it. a good rub down and a few coats of paint,and adjust the shoes while im there.
I wish I could do the underside of the car but unfortunately I dont have a garage. Changing a bulb for 2hrs in the freezing cold was bad enough lol!!"He's a maniac, maniac that's for sure,
He will kill your cat and nail him to the door" :eek:
Murphys No More Pies Club Member #950 -
I wish I could do the underside of the car but unfortunately I dont have a garage. Changing a bulb for 2hrs in the freezing cold was bad enough lol!!
neither do i. its a job that can wait for a month or so till the temperature gets up a bit.
ive fitted led number plate lights to it,got them from this guy on ebay, these are the exact one i got, they are super bright and spread the light evenly across the plate.
definatly worth while if you have been thinking about it.
http://cgi.ebay.co.uk/Hi-Power-WHITE-36mm-LED-NUMBER-PLATE-LIGHT-239-C5W-bulb_W0QQitemZ180306978622QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item180306978622&_trksid=p3286.c0.m14&_trkparms=72%3A1689|66%3A2|65%3A12|39%3A1|240%3A1318...work permit granted!0 -
goldspanners wrote: »neither do i. its a job that can wait for a month or so till the temperature gets up a bit.
ive fitted led number plate lights to it,got them from this guy on ebay, these are the exact one i got, they are super bright and spread the light evenly across the plate.
definatly worth while if you have been thinking about it.
http://cgi.ebay.co.uk/Hi-Power-WHITE-36mm-LED-NUMBER-PLATE-LIGHT-239-C5W-bulb_W0QQitemZ180306978622QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item180306978622&_trksid=p3286.c0.m14&_trkparms=72%3A1689|66%3A2|65%3A12|39%3A1|240%3A1318
Easy to fit?"He's a maniac, maniac that's for sure,
He will kill your cat and nail him to the door" :eek:
Murphys No More Pies Club Member #950 -
Easy to fit?
super easy, small screwdriver to pop out the clear part of the lens, and pop out old filament bulb and fit new led bulb.
that auction is only for one, you would need to buy 2 but i think they combine or at least discount postage. 5 minutes will fit them.
not as bad as the headlight bulbs!
:p:p ...work permit granted!0 -
goldspanners wrote: »super easy, small screwdriver to pop out the clear part of the lens, and pop out old filament bulb and fit new led bulb.
that auction is only for one, you would need to buy 2 but i think they combine or at least discount postage. 5 minutes will fit them.
not as bad as the headlight bulbs!:p:p
Cool cheers. Just got a few final mods to do then my car is finished! Colour code and fit the door handles, lower the car, get the collection exhaust cover and finally refurb my Zetec alloys as they are in a state at the moment!"He's a maniac, maniac that's for sure,
He will kill your cat and nail him to the door" :eek:
Murphys No More Pies Club Member #950 -
Cool cheers. Just got a few final mods to do then my car is finished! Colour code and fit the door handles, lower the car, get the collection exhaust cover and finally refurb my Zetec alloys as they are in a state at the moment!
cool. you wont be disappointed with the led number plate bulbs, just make sure you angle them propely when you fit them, so they shine on to the plate....work permit granted!0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 351.1K Banking & Borrowing
- 253.2K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244.1K Work, Benefits & Business
- 599.1K Mortgages, Homes & Bills
- 177K Life & Family
- 257.5K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards