We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Dualit toaster broke

Options
2»

Comments

  • The screws pictured are called 'system zero'. Some game consoles use them so if you search for a 4.5mm gamebit you should find a suitable tool to remove them.

    stevee, would like to know what spade connector you used to fix your toaster as not keen to solder if poss.
  • steveeeee
    steveeeee Posts: 409 Forumite
    Part of the Furniture 100 Posts Name Dropper Combo Breaker
    edited 27 January 2011 at 11:09PM
    Ah, system zero. Thanks for that bit of info! You should add that to the link I posted earlier (no need to sign up to the site) as people will find it very useful.

    I used one of these connectors - http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_160811_langId_-1_categoryId_165562

    Cut the manky end of the wire off, but leave the original crimped connector attached to the prong. Undo the screws holding the clamp on the mains cable and pull it through a bit to give you enough wire to re-attach to the prong. Cut and strip the wire so it's just the right length, then crimp the connector onto the end. With a bit of bending and squeezing, it should fit tightly over the original connector.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.8K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.