We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
How do I cut an L-shape from a wall tile
Options
Comments
-
Would agree a wet tile saw is great BUT we have to work with wot we/you got!
Raksha idea is simple, but not ideal , Could be that when you are using the tile saw for the 2nd , its the vibrations that cause the premature cracking. Support the tile.
Yes must be the vibrations. Holding between two bit of wood with two clamps and on my workmate.A retired senior partner, in own agency, with 40 years experience in property sales & new build. In latter part of career specialising in commercial - mostly business sales.0 -
take it to topps tiles who will cut it for you for a small chargeHi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure0
-
Sorry can't agree. The break you make will finish up attracting dirt and will be more obvious as time goes by.It may be that I will need to do that! Yes makes sense thanks
Strongly suggest you go for my suggestion: cut a small hole with a masonry drill at the 90º inner, put some masking tape on and mark the two lines with a pen, then cut slowly and firmly with a ceramic saw blade - especially if you have a couple spare (even if they're not the same pattern) to practice on. Do my way first.0 -
Sorry can't agree. The break you make will finish up attracting dirt and will be more obvious as time goes by.
Strongly suggest you go for my suggestion: cut a small hole with a masonry drill at the 90º inner, put some masking tape on and mark the two lines with a pen, then cut slowly and firmly with a ceramic saw blade - especially if you have a couple spare (even if they're not the same pattern) to practice on. Do my way first.
Good idea and will definitely give it a go.A retired senior partner, in own agency, with 40 years experience in property sales & new build. In latter part of career specialising in commercial - mostly business sales.0 -
I always used to use the tile saw, set into a tile saw frame from Plasplugs. This has a much deeper reach than a junior hacksaw. On occasion I have nibbled. But both methods are laborious and can snap the tile when you are nearly finished. Very frustrating. If I was tiling now, I would certainly use a wet tile saw, especially for the L shaped cut.I can afford anything that I want.
Just so long as I don't want much.0 -
dont cut the tile in 2 - as the above people say get a tile saw or an electric tile cutter for £25 give or take. theyre brilliant.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 351.1K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244.1K Work, Benefits & Business
- 599K Mortgages, Homes & Bills
- 177K Life & Family
- 257.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards