Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
no internet connection after hardrive reformat
dbs
Posts: 494
Forumite
in Techie Stuff
Due to problems on my new hardrive decided to format the hardrive and installed windows xp again but I cant set up my ntl internet broadband connection all I get is a message cant find network adapter.
My old hardrive has Windows Me which works fine with the same ntl set up so all cables and connections and modem are ok.
How can I get my new hardrive internet to work?
Could I transfer any information via floppy disc from old to new drive?
Tried to set both hardrives as Primary and slave but failed just get a blue screen.
My old hardrive has Windows Me which works fine with the same ntl set up so all cables and connections and modem are ok.
How can I get my new hardrive internet to work?
Could I transfer any information via floppy disc from old to new drive?
Tried to set both hardrives as Primary and slave but failed just get a blue screen.
0
Comments
-
dbs wrote:Due to problems on my new hardrive decided to format the hardrive and installed windows xp again but I cant set up my ntl internet broadband connection all I get is a message cant find network adapter.
My old hardrive has Windows Me which works fine with the same ntl set up so all cables and connections and modem are ok.
How can I get my new hardrive internet to work?
Could I transfer any information via floppy disc from old to new drive?
Tried to set both hardrives as Primary and slave but failed just get a blue screen.
Have you checked proxy settings in the Internet Connections, LAN Settings0 -
is your network adapter showing as installing and working?0
-
Try..
Start, Set Program Acess and Defaults also available in Control Panel
then click on Windows Components and tick Networking Services then
next, It might not have installed from the new installation.0 -
Is your network adaptor integrated into your motherboard or is it a pci NIC? If it's the former did you install the chipset drivers after you reinstalled Windows?
:cool:
TOG604!0 -
intel wrote:Try..
Start, Set Program Acess and Defaults also available in Control Panel
then click on Windows Components and tick Networking Services then
next, It might not have installed from the new installation.
Could you give more info on this sorry but cant find Set program access and defaults in control panel.0 -
Toxteth_OGrady wrote:Is your network adaptor integrated into your motherboard or is it a pci NIC? If it's the former did you install the chipset drivers after you reinstalled Windows?
I think it is the pci NIC did not install any chipset drivers0 -
dbs wrote:I think it is the pci NIC did not install any chipset drivers
After a fresh Windows install you will need to reinstall your chipset drivers for your PC to work correctly.
:cool:
TOG604!0 -
Toxteth_OGrady wrote:After a fresh Windows install you will need to reinstall your chipset drivers for your PC to work correctly.
:cool:
TOG
Id agree this sounds like the problem ......
0 -
What are chip set drivers where can I get them from?
Also got a message from the taskbar Local area connection cable unplugged SiS 900 PCI Fast ethernet Adapter.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards