cant get Freeview on my Tv ???

niceday999

I have a Goodmans tv in the kitchen . I had freeview on it last week now it says dtv - No Input ?
i can only get the basic bbc1 bbc2 itv c4 and chanel 5
i must be on annalogue chanels . what has happened ?
i waS ABLE TO GET ALL MY FREEVIEW CHANNELS LAS WEEK ....HELP
the input options are -
tv
scart
av
pc-rgb
ypbpr
hdmi
dtv
i am pressing dtv but thats when i get the DTV no input message

aliEnRIK

It has INTERNAL freeview or theres an EXTERNAL freeview box?
Im assuming internal so there SHOULD be a way of swopping between analogue and digital (Usually the same button)

polomint_2

Have you tried unplugging it and re booting?

jaygrunt

have you tried the old favourite??

Turn it off ..leave it for 5 mins and re start it
Usually works for me

niceday999

Its built in. its a goodmans gtvl15w18hdf
good we tv just for the kitchen...if i can get it to work.
will try unplugging it all. will that not knock off all the channel ?

polomint_2

i wouldnt of thought so. i re boot mine evry so often and re can to find any new channels

aliEnRIK

If you power off it will need the channels reloading (Possibly)
No biggie but Id recommend against it as until theyre loaded in then it WILL be a blank screen
of the keys youve put
uve tried dtv (Which is what i would have tried myself)
so try tv
and ~ ypbpr (NO idea what that is)
the others are all external options
HOWEVER
you could also try pressing 'av' a few times to cycle through them just to see if it switched digital back on

niceday999

aliEnRIK wrote: »

If you power off it will need the channels reloading (Possibly)
No biggie but Id recommend against it as until theyre loaded in then it WILL be a blank screen
of the keys youve put
uve tried dtv (Which is what i would have tried myself)
so try tv
and ~ ypbpr (NO idea what that is)
the others are all external options
HOWEVER
you could also try pressing 'av' a few times to cycle through them just to see if it switched digital back on

when i press Tv it comes on but only the 5 channels i mentioned.
DTV - dIGITAL TV SIGNAL ( TV ARIEL )
YPBPR-SGNAL FROM YPBPR (COMPONEMT ) SOCKET
THINK IT MUST BE DTV BUT IT SAYS NO INPUT

aliEnRIK

How old is the tv?
If its recently updated theres a (sorry) possibility that your digital tv is now dead as the internal freeview box couldnt take the update. IF this is true im afraid that theres nothing you can do.
Are there 2 aerial connections on the back? If so just try the other
If not the only other thing I can suggest is going into the menus to see if there are any other options (look up digital tv and try to scan for new channels etc)

niceday999

aliEnRIK wrote: »

How old is the tv?
If its recently updated theres a (sorry) possibility that your digital tv is now dead as the internal freeview box couldnt take the update. IF this is true im afraid that theres nothing you can do.
Are there 2 aerial connections on the back? If so just try the other
If not the only other thing I can suggest is going into the menus to see if there are any other options (look up digital tv and try to scan for new channels etc)

A WEEK OLD.
I can only get to "TV" which is now auto tuning - analogue channels only
i cant get on DTV to auto tune again ? it may be the ariel ?

vyseyboy

There should be a co-axial input for the aerial at the back.... it's not been knocked out, has it?