📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

How much is an 8m long RSJ?

i know how long is a bit of string, but how much roughly would an RSJ be support a bedroom above it after taking out back wall of the house? Length approx 7.8m, and would have large (approx 6m wide) bi-fold doors under it?
Just a ballpark figure as i have no idea at all, are we talking hundreds, or thousands?
«1

Comments

  • SailorSam
    SailorSam Posts: 22,754
    10,000 Posts Combo Breaker
    Forumite
    Shop around in builders merchants.
    Liverpool is one of the wonders of Britain,
    What it may grow to in time, I know not what.

    Daniel Defoe: 1725.
  • 27col
    27col Posts: 6,554 Forumite
    Why would you not be asking this question of a steel supplier.
    Then you would know exactly and not just approximately.
    I can afford anything that I want.
    Just so long as I don't want much.
  • NICHOLAS_2
    NICHOLAS_2 Posts: 613 Forumite
    Probably less than 400 quid.
  • CKdesigner
    CKdesigner Posts: 1,234
    Part of the Furniture Combo Breaker
    Forumite
    Hi

    It's not the cost of the steel to worry about, it's the cost of the total job that's important.

    I can't remember what the 'rule of thumb' cost is but it's 1, 2 or 3 £'000 per meter. I've got a feeling it's £3,000 a meter for the complete job which means 8m would be £24K.

    You also need to be careful when removing the whole back wall of your house, depending on the existing construction as you may need a steel box construction, which is 4 X steel beams making a box shape which will be more expensive still!
  • phill99
    phill99 Posts: 9,092
    Part of the Furniture 1,000 Posts
    Forumite
    Before you get the price for the steel (which CKDesigner identifies), you need to engage a Structural Engineer. They will determine exactly what steel is required and its dimemsions.
    Eat vegetables and fear no creditors, rather than eat duck and hide.
  • CKdesigner
    CKdesigner Posts: 1,234
    Part of the Furniture Combo Breaker
    Forumite
    That's right Phil, the OP needs a structural engineer. But normally a decent builder will know one.
  • System
    System Posts: 178,492
    10,000 Posts Photogenic Name Dropper
    Community Admin
    It's not quite as simple saying it's an 8m beam, they vary significantly in size/weight per m so it's not much use finding out the cost of a beam per se, you probably want to ask a builder for a rough costing before taking it much further...
    This is a system account and does not represent a real person. To contact the Forum Team email forumteam@moneysavingexpert.com
  • Doozergirl
    Doozergirl Posts: 34,082
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Forumite
    CKdesigner wrote: »
    Hi

    It's not the cost of the steel to worry about, it's the cost of the total job that's important.

    I can't remember what the 'rule of thumb' cost is but it's 1, 2 or 3 £'000 per meter. I've got a feeling it's £3,000 a meter for the complete job which means 8m would be £24K.

    You also need to be careful when removing the whole back wall of your house, depending on the existing construction as you may need a steel box construction, which is 4 X steel beams making a box shape which will be more expensive still!

    Erm, it's really not! It's true that price per linear metre is affected by the size of the steel, but it's more likely to be around £40 per metre - so £320 plus VAT. Sometimes you need two. Very much an 'ish' but I had to comment - no way is it £24k!!
    Everything that is supposed to be in heaven is already here on earth.
  • muckybutt
    muckybutt Posts: 3,765
    Part of the Furniture Name Dropper Combo Breaker
    Forumite
    If you know the thicknesses the beam needs to be then have a look on here - not saying I recommend then just that they have an on line price calculator ...... certainly not £3k per meter as mentioned above :rotfl::rotfl::rotfl:
    http://www.jgfabs.co.uk/beamsandcolumns/beamcalculator.php
    You may click thanks if you found my advice useful
  • martin1959
    martin1959 Posts: 363
    Part of the Furniture 100 Posts Combo Breaker
    Forumite
    You would definitely need a structural engineer.


    Even a RSJ at 8m may 'sag' slightly in the centre, which could easily interfere with the running of the bifold doors beneath,
    20 plus years as a mortgage adviser for Halifax (have now retired), and I have pretty much seen it all....:D
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 355.9K Banking & Borrowing
  • 255K Reduce Debt & Boost Income
  • 456.2K Spending & Discounts
  • 248.4K Work, Benefits & Business
  • 606.1K Mortgages, Homes & Bills
  • 179K Life & Family
  • 263.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.