Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Cost for replacing kitchen tap
pizzarelli7348
Posts: 99 Forumite
Hi there,
we have had a leaking tap in the kitchen for some time. The plumber came this morning and said we needed a new tap. The quote for replacing the tap and fitting it is £150. I find it a bit expensive and told him so but he said he normally charges £200. :eek:
The tap he would be buying cost (that is what is said) £75 and he would need £75 to fit it .
I know also what tap he would be buying. The made is ALTERNA and and is a single tap.
Any idea if he's ripping me off?
Thanks
we have had a leaking tap in the kitchen for some time. The plumber came this morning and said we needed a new tap. The quote for replacing the tap and fitting it is £150. I find it a bit expensive and told him so but he said he normally charges £200. :eek:
The tap he would be buying cost (that is what is said) £75 and he would need £75 to fit it .
I know also what tap he would be buying. The made is ALTERNA and and is a single tap.
Any idea if he's ripping me off?
Thanks
0
Comments
-
Most leaking taps can be sorted by fitting a new tap washer (10p max) and reseating the bit of the tap that the washer fits against. You will need a reseating tool (about £8 from any DIY store) and you will have to take the tap apart to use it. Take a look at this for how to do it. Lot less than £200.0
-
If a customer wants a tap changed, it depends on what exists at the moment. If the tap is fitted with flexible connectors and in line valves, then it is relatively straightforward. We would charge about £75. If there is no in line valves and the system has to be drained and refilled, it takes longer and we charge £90 - £100. Remember you are not paying for time: you are paying for expertise. Out of any price, 10% of the price is to do the job and 90% is to know how to do the job!Eat vegetables and fear no creditors, rather than eat duck and hide.0
-
liitleblackcat wrote: »Most leaking taps can be sorted by fitting a new tap washer (10p max) and reseating the bit of the tap that the washer fits against. You will need a reseating tool (about £8 from any DIY store) and you will have to take the tap apart to use it. Take a look at this for how to do it. Lot less than £200.
But you are making the assumption that it's not a ceramic disc type. Also depends where the leak actually is. I think you ae assuming it's just a dripping tap but the OP doesn't say that.
Cheers0 -
If a customer wants a tap changed, it depends on what exists at the moment. If the tap is fitted with flexible connectors and in line valves, then it is relatively straightforward. We would charge about £75. If there is no in line valves and the system has to be drained and refilled, it takes longer and we charge £90 - £100. Remember you are not paying for time: you are paying for expertise. Out of any price, 10% of the price is to do the job and 90% is to know how to do the job!
I will have to increase my prices, i only charge £40 even if i have to drain off.A thankyou is payment enough .0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards