Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
DVD Recorder Connections
swifty_2
Posts: 57 Forumite
in Techie Stuff
I recently purchased a Panasonic DMRES 10 DVD Recorder and connected it into my system which includes a Free To Air Digital Box. I now find that when the DVD is swiched on or recording the Digital Box will not operate but is fine when the Dvd recorder is switched off. Any advice gratefully recieved.
Thank you.
Thank you.
0
Comments
-
You have probably got a croosed signal via the scart leads, are you
using a scart extension block looks summet like this http://www.maplin.co.uk/Module.aspx?ModuleNo=47314&doy=8m9D
Some devices wont operate on the same scart frequency.
Frequency is used as its easily understandable, OK0 -
Scarts don't have a frequncy. They do however have an inbuilt switching signal which can sometimes cause problems.
You'll need to provide more details of how you've got things connected up- are they both going into the TV via seperate scart sockets for example?0 -
are you using Q-Lin kfunctions or Direct TV record on the Recorder?0
-
Thank you for your interest. The digi box is connected to the DVD Recorder by SCART Lead and then the DVD Recorder is connected to the TV by SCART Lead. The telivison is normal connection it has no Q function.0
-
Aerial from wall into Digi Box, Then Aerial to TV from Digi Box, Scart from digi box to TV, Scart from DVD to TV, Does that make sense0
-
makes sense except you won't be able to record from the digibox.....
which scart socket on the Pansonic has the digibox attached, if it only doesn't work when the recorder is switched on it sounds like the channel it's passing through may just be wrong(when you try and change channels on the digibox can you see the light on digibox flashing as though it is getting a signal), i.e when the recorder is on the channel needs to be AV2(A2) to pass through the signal. When it switches off then the digibox signal will go through
as for watching when you are recording, if you are recording from the digibox then you will have to watch your TV's normal analogue channels or what you are recording. If you are recording of the DVD recorders internal tuner then because the digibox signal will be overriden and not passed through yuo'll need either an RF loop from the digibox to the TV and tune in a channel, or if the digibox has a second scart socket and your TV does then put a direct ink in via scart. That way, if you are watching via DVd recorder the TV should be AV1, if you are recording but still want to watch digibox you'd then use AV2 on the TV0 -
Aerial from wall into Digi Box, Then Aerial to DVD from Digi Box, Scart from digi box to TV, Scart from DVD to TV, Does that make sense
Or wot about this way around, does the DVD have an aerial socket?0 -
not all digiboxes will have an aerial out socket, and surely after expense of digibox and DVD recorder you want to be recording using the best picture quality possible, i.e. scart connection rather than RF?0
-
Aerial to Digibox, Digibox Scart to DVD, DVD Scart to TV,
0 -
Mr Skint, that's exactly how the OP already has it connected as they stated at 11:530
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards