Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Attn Browntoa/Rex Mundi
derbylad111
Posts: 38 Forumite
in Techie Stuff
Hello guys
sorry for singling you out but on this link you helped me out:
http://forums.moneysavingexpert.com/showthread.html?t=83869&page=2
The thing is...I thik I have c****d up!! After following the advice on the link, I went to Ebay and purchased 2 lots of 128 mb SDRAM 168 pin to boost my ram up to 512mb.
However, just the other day, I managed to find my manual. It stated that the maximum memory the Aladdin 5 board will support id 384 MB.
I havent installed it yet as I am waiting for the other 128 MB RAM to be delevered (have recived one stick so far)
So I guess, what I am asking is do I take what the manual is saying as gospel ie no more than 384mb allowed.
And if so, will my board be affected in any serious way by having 3x128 mb memory in there - of which there may be at least 2 of different speeds etc.
Many thanks in advance and sorry for the aggro I am causing you.
sorry for singling you out but on this link you helped me out:
http://forums.moneysavingexpert.com/showthread.html?t=83869&page=2
The thing is...I thik I have c****d up!! After following the advice on the link, I went to Ebay and purchased 2 lots of 128 mb SDRAM 168 pin to boost my ram up to 512mb.
However, just the other day, I managed to find my manual. It stated that the maximum memory the Aladdin 5 board will support id 384 MB.
I havent installed it yet as I am waiting for the other 128 MB RAM to be delevered (have recived one stick so far)
So I guess, what I am asking is do I take what the manual is saying as gospel ie no more than 384mb allowed.
And if so, will my board be affected in any serious way by having 3x128 mb memory in there - of which there may be at least 2 of different speeds etc.
Many thanks in advance and sorry for the aggro I am causing you.
0
Comments
-
384 seems an odd amount...
what is the Motherboard number it states on the manual ?
does it say P5A-B ?Ex forum ambassador
Long term forum member0 -
if its the
ASUS P5A-B BABY AT MOTHERBOARD
Memory3 168-pin DIMM EDO/SDRAM (PC-100 capable) Slots. 768 MB max; 128 MB cachedEx forum ambassador
Long term forum member0 -
The manual says it is the J-542B/542BS mainboard.
Seems quite strange really because on one page of the manual it says that DRAM support is for 2x72 pin SIMMs and 2x 168 pin DIMMS (3.3v) of 4,8,16,32 or 64mb to froma memory size between 8mb to 384 GB (gigabyte!)
On other page it says motherbopard supports two 168 pin DIMM module, can only use +3v unbuffer synchronous DRAM. The max memory size is 384 MB when use DIMM Module and SIMM together right now.
The above 2 paragraphs are taken direct from the manual -I have no idea what it all means.
0 -
if you're using the Simms and Dimms sockets together (all 4 sockets) you can only use a maximum of 384mb. If you're just using the 168pin Dimm sockets you can go a lot higher.0
-
HOw do I determine whether the memory I have installed on the system is SIMM or DIMM.
Saying that, I dont even know which the 2x128mb i have just purchased from ebay are.!!
What a mess.
I have brought the manual with me to work today, so if anyone can offer further assistance I can get you all the details you need from there if need by.
1 other question..are all the memory points on the motherboard the same size? I have 2x DIMM and 2xSIMM but on the diagram of the board in manual they seem to be a different size.

0 -
hello...
is anyone there to help me please?0 -
Try doing a search here http://www.crucial.com/search/index.asp0
-
0
-
If it's DIMM would be in the longer slots. If it's SIMM it would be in the shorter slots.
Ideally, I would say you need 2X 256MB 168 pin SDRAM (to fit the longer slots). If you have 1 stick of 256MB in already, you will need another. If you have bought 2X 128MB SDRAM. It may be an idea to change these or sell them on, and buy one stick of 256MB. This will take you up to the maximum for W98.
I run a W98SE computer on 512MB RAM, and its goes like lightning. I very rarely have to wait for it to load anything.How many surrealists does it take to change a lightbulb?
...
...
...
...
Fish0 -
thanks
but what if I have 2x128mb ram already installed in it0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
