Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Netgear Help!
suekjw
Posts: 866
Forumite
in Techie Stuff
Following advice on here I brought a Netgear DG834G and with Merciless Killer's advice had it al set up and running well until yesterday when it suddenly stopped working in the middle oof being on the net.
Now, today (when I've plucked up the courage to try and sort it out) its really wierd (technical term lol!).
Just tried to reset it up BUT when I go onto local connections it doesn't come up for NETGEAR, but something called REALTEK RTL8139/810x Family, or the other one showing is 1394 Connection #2.
Would that be from someone elses connection? The wireless USB lead is trying to connect but can't find the router.
Now, today (when I've plucked up the courage to try and sort it out) its really wierd (technical term lol!).
Just tried to reset it up BUT when I go onto local connections it doesn't come up for NETGEAR, but something called REALTEK RTL8139/810x Family, or the other one showing is 1394 Connection #2.
Would that be from someone elses connection? The wireless USB lead is trying to connect but can't find the router.
0
Comments
-
Heya Sue
Don't worry about it. RealTek is a hardware device on your pc and not an actual network connection as such.
As long as your connected to a network it should be the netgear one. To double check, try accessing the router config page from your machine. If it works then you are connected to it!
Hope you get it all working again soo.
(Just searched for that realtek device and it is the ETHERNET driver on your computer. In other words.. when you are using wireless, it will be disabled and not active. When you use ethernet it is using the REALTEK driver)[FONT=Arial, Helvetica, sans-serif]"The internet is a great way to get on the net."
- Bob Dole, Republican presidential candidate[/FONT]0 -
STILL after help regarding setting up a wireless network
Need to connect 2 desktops and a laptop to the internet
Is the product currently on offer at pcworld any good?
http://www.pcworld.co.uk/martprd/product/seo/757871
if it will do the job, what else do i need?
how easy is it to setup?
My broadband provider is Eclipse internet if that makes any difference
Regards
Pete0 -
suekjw wrote:Following advice on here I brought a Netgear DG834G and with Merciless Killer's advice had it al set up and running well until yesterday when it suddenly stopped working in the middle oof being on the net.
Now, today (when I've plucked up the courage to try and sort it out) its really wierd (technical term lol!).
Just tried to reset it up BUT when I go onto local connections it doesn't come up for NETGEAR, but something called REALTEK RTL8139/810x Family, or the other one showing is 1394 Connection #2.
Would that be from someone elses connection? The wireless USB lead is trying to connect but can't find the router.
A Netgear DG834G is a router and won't show up in Network connections, the Realtek is your network card and this should be enabled.0 -
mercman wrote:STILL after help regarding setting up a wireless network
Need to connect 2 desktops and a laptop to the internet
Is the product currently on offer at pcworld any good?
http://www.pcworld.co.uk/martprd/product/seo/757871
if it will do the job, what else do i need?
how easy is it to setup?
My broadband provider is Eclipse internet if that makes any difference
Regards
Pete
That's a great router and not a bad deal at all. You'll need a network card in all 3 machines although the USB wireless adapter will be one of them, you'll also need a network cable (it will come with 1 but you need 2)
That should be all as the router comes with everything else.0 -
Gibblestick wrote:That's a great router and not a bad deal at all. You'll need a network card in all 3 machines although the USB wireless adapter will be one of them, you'll also need a network cable (it will come with 1 but you need 2)
That should be all as the router comes with everything else.
Will need 2 :eek: network cables?
Thought the idea of wireless, was just that, wireless??
I already have a broadband moden (SMC7401BRA) does that have a network cable...and will that suffice along with the one supplied with the router?
Would be grateful if you could post links to EXACTLY what i require if possible as dont want to end up buying stuff i dont need!
Cheers for the post anyway, was a shock to find a wireless network needed MORE cables than i already got!!
Regards
Pete0 -
Mercman, no you won't need any network cables for a wireless network, and that Netgear DG834GT will do the job, replacing your existing broadband modem.
However, I would advise having a wired connection for one of the computers - at least for the initial setting up of the router and any subsequent troubleshooting. And definitely use a wired connection if you're upgrading the router's firmware.
To network your 2 desktop PCs wirelessly, they each need a wireless USB adapter or a wireless PCI adapter.
To network your laptop wirelessly, it needs a wireless PCMCIA/Cardbus adapter.
Get wireless adapters which match the 802.11g spec of the router.
The Netgear DG834GT comes with a network cable so you won't need to buy one and the wireless bundle comes with either a USB adaptor or a PCMCIA adaptor, so that takes care of either the laptop or one of the PCs, depending on which freebie you go for (although some retailers like PC World don't give you a choice), which leaves 2 of the wireless adapters mentioned above to buy in addition.0 -
I'm in the process of sending back a netgear dg834gt to the supplier. It is a great router, it is very easy to set up. I managed to set up a wireless network, the web based configuration tool is very simple to use. The main problem I had with the router apart from it not letting me take an accurate speed test was the fact it wouldn't connect to the internet after a week of medium use. Or rather it did connect to the internet but it didn't think it was. There was no problem with my isp as when I plugged in my usb modem the internet worked fine. No matter what I did to the router I couldn't get it to reconnect.
There is a very long thread here on the official netgear support forums with people that have been having problems since January with that particular router. When it works, it's great. When it doesn't...0 -
mercman wrote:Will need 2 :eek: network cables?
Pete
2 PCs plus 1 laptop, makes 3 in total,
Having 1 wirelessley connected leaves 2 needing wires (or another wireless adapter)0 -
Gibblestick,
you are confusing me more & more.....more wires
i want to set up a WIRELESS network, so why on earth would i need cables?
Is the router cabable of running 3 computers?
If i connect the main desktop up with wires, surely the other desktop which is in another room nowhere near the router and the laptop(portable) should be able to be run WITHOUT wires?
Cheers
Pete0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards