We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
All about plasterboard
Options

callansdad
Posts: 766 Forumite

Hi there,
Can someone explain the difference between using tapered or square edge PB. Also is there a huge difference in quality of plasterboards available i.e is stuff on ebay a false economy?
Finally what would you consider a good price for plain 12.5mm and foil 12.5mm and is 9mm good enough for internal walls?
Cheers all
Can someone explain the difference between using tapered or square edge PB. Also is there a huge difference in quality of plasterboards available i.e is stuff on ebay a false economy?
Finally what would you consider a good price for plain 12.5mm and foil 12.5mm and is 9mm good enough for internal walls?
Cheers all
A banker is someone who lends you an umbrella when the sun is shining, and who asks for it back when it start to rain.
0
Comments
-
not sure on the edges as we only sell tapered edge stuff,but beleive it or not our 12.5 is cheaper than 9.5Live in my shoes for a week,then tell me your lifes hard!0
-
I am no expert but plasterboarded our barn conversion. We used square edged which was plastered over. I understood from the builders merchant that round edged was for dry lining (ie not plastered over). We paid £3.45 a sheet 2400 x 1200 x 12.5. I suspect you get more of a discount for the quantity you buy. As I say I am no expert and may be wrong the on edges description.0
-
Tapered edge is generally for dry lining. A Scrim Tape is put over the joint, filler is then applied to cover the whole width of the taper, then sanded off to give that invisible join finish.
Sq edge is indeed generally used for plastering over.
WoodyCity & Guilds qualified Wood Butcher:D0 -
12mm is better than 9mm.
9mm is just too thin.
Tapered edge boards mean that if you use the direct bond method you can simply finish the boards by taping the joint between the boards. When you butt two tapered edge boards together you get a "V" where you can apply scrim and a couple of coats of jointing compound. You can then sand this down and then paint the boards with board sealer/finish and that is it. If you use square edge you would have to skim the whole lot with plaster.0 -
Great answers so far ... thanks a lot.
What about quality and pricing?A banker is someone who lends you an umbrella when the sun is shining, and who asks for it back when it start to rain.0 -
9.5mm - approx £5.40 per sheet.
12.5mm - approx £5.90 per sheet.
Foil back is usually a couple of quid extra.
9.5mm is usually used for over boarding ceilings and 12.mm is used for walls (and ceilings when screwing to joists)
As for se and tapered, its as woody says.0 -
I know this thread is a little old now.. I am currently plasterboarding with tapered edge pb and wanted to know about this 'jointing compound' that you fill the tapered part (ontop of the tape). I've not been able to find it in B&Q - is it actual stuff or is it a type of polyfiller?
Thanks!0 -
Wickes do it ready mixed in a TUBEx forum ambassador
Long term forum member0 -
and it is actually called jointing compound? Great - thank you!0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 350.8K Banking & Borrowing
- 253K Reduce Debt & Boost Income
- 453.5K Spending & Discounts
- 243.8K Work, Benefits & Business
- 598.6K Mortgages, Homes & Bills
- 176.8K Life & Family
- 257.1K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards