We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

Is safety film for internal glazed doors effective and easy to fit?

We have a glazed internal doors dividing an area, old crittall doors with small panes. Rather than replacing looking at the option of putting a safety film on them to prevent accidents as meant to hold glass together. Looking to rent the house out as can't sell it. 
Has anyone experience, and is it easy to fit yourself and are there different quality films etc.
All advice appreciated.

Comments

  • gefnew
    gefnew Posts: 996 Forumite
    Part of the Furniture 500 Posts Name Dropper
    have a look here and you can then decide what you require.
    3M™ Safety and Security Window Films, Safety Series | 3M United Kingdom
  • I've installed privacy and blackout films on glass a few times. Never safety film, but I imagine the process is similar and I'd expect a product from a company like 3M to perform as advertised. In general such films are reasonably easy to fit with some practice. The hardest aspects are...
    1. Trimming the film to size. I had most success when I initially cut the film slightly oversize, then trimmed the edge with a sharp knife after I'd attached it to the glass. This allowed me to get the edge in the right place and follow any slight irregularities of the boundary between glass and frame. The edge won't be perfectly straight, especially where a traditional glazing method (putty etc) has been used.
    2. Applying the film to the glass while avoiding bubbles. This was easiest with films that are moistened with a mist of water before applying. You'll need to use a squeegee or a flexible straight-edged tool like a credit card to push outwards from the centre as you apply the film to the glass. There's a bit of a knack to this. Start with panes that will be less visible - the extreme top and bottom of the door - and leave the most noticeable areas - around eyelevel - until you've practised a bit.
  • plumb1_2
    plumb1_2 Posts: 4,650 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    edited 12 December 2025 at 5:11PM
    gefnew said:
    have a look here and you can then decide what you require.
    3M™ Safety and Security Window Films, Safety Series | 3M United Kingdom
    I don’t think the regs would allow that sort of film if you are considering renting the property out?
    I think it has to be toughened glass under 1500 mm  from ffl, needs further investigation.
    A thankyou is payment enough .
  • TC77
    TC77 Posts: 2,618 Forumite
    Seventh Anniversary 1,000 Posts Name Dropper
    Thank you for comments, I'll check the standard we have to meet and note the technique and practice and starting with least visible areas  :)
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 354.5K Banking & Borrowing
  • 254.4K Reduce Debt & Boost Income
  • 455.4K Spending & Discounts
  • 247.4K Work, Benefits & Business
  • 604.2K Mortgages, Homes & Bills
  • 178.5K Life & Family
  • 261.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.