Identifying a fitted kitchen

bjorn_toby_wilde

And this looks very like the handle to me

https://www.wickes.co.uk/Wickes-Flat-Stainless-Steel-Cabinet-Handle---160mm---Pack-of-2/p/253737

FFHillbilly

bjorn_toby_wilde said:

Something like this? https://www.wickes.co.uk/Wickes-Ohio-Grey-Shaker-Appliance-Door-B---600-x-731mm/p/307120

Those are 18mm and the outer frames look thinner than mine so not the same, but I think theres a good chance that it came from Wickes or Benchmarx, there used to be a Benchmarx kitchen place at a local Travis Perkins but it closed down, I know that TP and Wickes used to be the same company. I'll contact Wickes next.
I do actually think they could be 731mm too, but it's difficult to measure to the accuracy of 1mm with a tape measure

WIAWSNB

Promising. Yes, Benchmarx is another trade biggie.
How certain are you they are 19mm thick? How did you measure this?

FFHillbilly

bjorn_toby_wilde said:

And this looks very like the handle to me

https://www.wickes.co.uk/Wickes-Flat-Stainless-Steel-Cabinet-Handle---160mm---Pack-of-2/p/253737

Good detective work, thanks

WIAWSNB said:

Promising. Yes, Benchmarx is another trade biggie.
How certain are you they are 19mm thick? How did you measure this?

just with a tape measure, but I have just found the box with the digital vernier's in and discovered it is actually nearer 20mm, (19.6 actual)

bjorn_toby_wilde

FFHillbilly said:

bjorn_toby_wilde said:

And this looks very like the handle to me

https://www.wickes.co.uk/Wickes-Flat-Stainless-Steel-Cabinet-Handle---160mm---Pack-of-2/p/253737

Good detective work, thanks

WIAWSNB said:

Promising. Yes, Benchmarx is another trade biggie.
How certain are you they are 19mm thick? How did you measure this?

just with a tape measure, but I have just found the box with the digital vernier's in and discovered it is actually nearer 20mm, (19.9 actual)

That’s good. Sounds like you’re getting closer 👍🏻

WIAWSNB

FFHillbilly said:

bjorn_toby_wilde said:

And this looks very like the handle to me

https://www.wickes.co.uk/Wickes-Flat-Stainless-Steel-Cabinet-Handle---160mm---Pack-of-2/p/253737

Good detective work, thanks

WIAWSNB said:

Promising. Yes, Benchmarx is another trade biggie.
How certain are you they are 19mm thick? How did you measure this?

just with a tape measure, but I have just found the box with the digital vernier's in and discovered it is actually nearer 20mm, (19.9 actual)

Blimey, I didn't expect that :-)
Sounds like a decent quality kitchen.

secla

have a look at wickes heritage range, handle looks like there georgia square bar handle as well

Ive never know n them to use those sige pull out wireworks though, they use hafele/blum

FFHillbilly

I think this could be it https://www.benchmarxkitchens.co.uk/kitchens/sherwood-french-white

WIAWSNB

Bone White, perhaps?
Seems to be a current range, so worth a trip. 

FFHillbilly

I'm getting there, contacted Benchmarx a few weeks ago and when they came to measure up and view it confirmed it was 100% Benchmarx Sherwood range, and later confirmed to my surprise it's apparently the Grey variant, not French White or Bone White