We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Solar PV "Power failure"? Technicians in North East? Help!

1…1011121315

Comments

  • Heedtheadvice
    Heedtheadvice Posts: 2,785 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    .....and just to clarify....

    There is nothing wrong with designing and installing a supply capacity of 20A ( or any other suitable figure) in it's entirety. What is not acceptable is just uprating the mcb without ensuring it is the correct value.

     That is why the initial installation and any changes  need to be done by a competent person to ensure correct operation, compliance with regs, safety and compliance with insurance cover. For England and Wales ( other jurisdictions differ) that means it is not a DIY job, however easy one might think the job is.
  • Telegraph_Sam
    Telegraph_Sam Posts: 2,611 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Agreed !          .
    Telegraph Sam

    There are also unknown unknowns - the one's we don't know we don't know
  • debitcardmayhem
    debitcardmayhem Posts: 13,002 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Any further forward with this Sam?
    4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy
  • Telegraph_Sam
    Telegraph_Sam Posts: 2,611 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    I have more or less given up with getting a local electrician (qualified for this) and have today been speaking to sustainable energy in Washington. Replace breakers or whole new inverter
    Telegraph Sam

    There are also unknown unknowns - the one's we don't know we don't know
  • debitcardmayhem
    debitcardmayhem Posts: 13,002 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Keep us informed 🤓
    4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy
  • Telegraph_Sam
    Telegraph_Sam Posts: 2,611 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    edited 29 August at 11:03PM
    Two / three heads are better than one. The options seem to be to pay sysenergy to check out the breakers, either the internal functions thereof or if there is some external source responsible, rodents, water or whatever.   And/or replace with the replacement breakers that I have purchased. Or go straight for a new inverter [Aurora?] which no doubt they would be happy to install for me.
    Telegraph Sam

    There are also unknown unknowns - the one's we don't know we don't know
  • Telegraph_Sam
    Telegraph_Sam Posts: 2,611 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    edited 8 September at 11:12PM
    Anti climax I'm afraid. The man from Sustainable Energy came today. After hearing my tale of woes he diagnosed a "loose connection" which he was able to fix with a screwdriver without changing either of the two breakers. Downsides: Call-out charge. Cost of replacement breakers. Lost days of solar feed. Upside: a useful contact to have for when the time comes to replace the inverter. Some you wins, some you don't.

    Surprisingly he recommended replacing with 20 amp breakers even though the system is set up for 16 amps. You pays your money and ..
    Telegraph Sam

    There are also unknown unknowns - the one's we don't know we don't know
  • QrizB
    QrizB Posts: 19,200 Forumite
    10,000 Posts Fourth Anniversary Photogenic Name Dropper
    Glad to know it was an easy fix and that you're back in business!
    N. Hampshire, he/him. Octopus Intelligent Go elec & Tracker gas / Vodafone BB / iD mobile. Ripple Kirk Hill member.
    2.72kWp PV facing SSW installed Jan 2012. 11 x 247w panels, 3.6kw inverter. 34 MWh generated, long-term average 2.6 Os.
    Not exactly back from my break, but dipping in and out of the forum.
    Ofgem cap table, Ofgem cap explainer. Economy 7 cap explainer. Gas vs E7 vs peak elec heating costs, Best kettle!
  • debitcardmayhem
    debitcardmayhem Posts: 13,002 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Hope it stays fixed and hope you didn’t lose too much gen/export.
    4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy
  • Telegraph_Sam
    Telegraph_Sam Posts: 2,611 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
                  
    Telegraph Sam

    There are also unknown unknowns - the one's we don't know we don't know
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.8K Banking & Borrowing
  • 253.4K Reduce Debt & Boost Income
  • 454K Spending & Discounts
  • 244.8K Work, Benefits & Business
  • 600.2K Mortgages, Homes & Bills
  • 177.3K Life & Family
  • 258.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.
Update Your Picture