Report on the health of your Smart Meter installation - BETA

chuckie851

This was mentioned on another thread, but I can't find it again.  It's https://homebrew.n3rgy.com/
It shows 4 warnings for me, including:   Warning: Device Configuration has not been completed [INSTALLED_NOT_COMMISSIONED]  and one about out of date firmware.

Has anyone found the results reliable?  Octopus Complaints say the meters and comms unit are commissioned OK even though they're not receiving any readings.

FreeBear

Hrmmm....

Gas Meter (Energy Supplier responsibility)
Device Type: GSME
Manufacturer: L+G
Model: G470-672
GUID: {redacted]
Installed: 2023-05-11
Firmware Certified: 06/07/2023
Firmware Age: 0 (number of newer versions available)
Security Expiry Date: 2024-06-24 00:00:00
 - Warning: Security Certification will expire in less than 3 months or has already expired

I wonder what happens when the security certificate expires.....

Ildhund

chuckie851 said:

Device Configuration has not been completed [INSTALLED_NOT_COMMISSIONED] 

Which device was that? I've seen it quite often in respect of the IHD, and customer service can usually put it right by sending the appropriate commissioning commands. 

No-one seems to take any notice of reports about expired certification or missing firmware updates, and they don't seem to have any effect on performance.

FreeBear

Ildhund said:

chuckie851 said:

Device Configuration has not been completed [INSTALLED_NOT_COMMISSIONED] 

Which device was that? I've seen it quite often in respect of the IHD, and customer service can usually put it right by sending the appropriate commissioning commands.

Gas meter (as per first line).

Lorian

That's a useful tool. It has a warning for one of mine that it could be subject to flaky Comms (trilliant smets1) - replaced already booked in for this reason). I think it's possibly just a generic warning for the model, but useful.

Swipe

FreeBear said:

Hrmmm....

Gas Meter (Energy Supplier responsibility)
Device Type: GSME
Manufacturer: L+G
Model: G470-672
GUID: {redacted]
Installed: 2023-05-11
Firmware Certified: 06/07/2023
Firmware Age: 0 (number of newer versions available)
Security Expiry Date: 2024-06-24 00:00:00
 - Warning: Security Certification will expire in less than 3 months or has already expired

I wonder what happens when the security certificate expires.....

Absolutely nothing. Mine has been like that since September.

Ildhund

FreeBear said:

Ildhund said:

chuckie851 said:

Device Configuration has not been completed [INSTALLED_NOT_COMMISSIONED] 

Which device was that? I've seen it quite often in respect of the IHD, and customer service can usually put it right by sending the appropriate commissioning commands.

Gas meter (as per first line).

Errr ... I was asking chuckie851.  

chuckie851

Yes, it's the IHD. I've asked them to send a command.
They've decided the comms unit needs a power cycle, though I may have to wait 8 weeks for that.  It will be very windy tomorrow.  Maybe a brief power cut will do the trick instead.