Oven Heat Deflector Strips

Can anyone tell me how I can protect my adjoining vinyl covered floor unit doors from heat from a side opening oven door?    We have already had to replace this unit door once after we rented out the property and the tenant used the oven and it curled the vinyl on the cabinet door and we had to replace it.    We have since not used the oven which is side opening onto the cabinet and the oven sits a bit further forward that the cabinet door so gets the blast of heat every time the oven door is opened.   We now want to use the oven again but need something to protect the side of the cabinet door from the heat.   I have attached a picture to show the problem.   Any suggestions?

Comments

  • FreeBear
    FreeBear Posts: 17,863 Forumite
    Ninth Anniversary 10,000 Posts Name Dropper Photogenic
    B&Q (and other sheds) sell heat deflector strips that are intended for this job. Costs about £10 for a pair. Pull the oven out, cut the strips to length, attach to the front edge of the housing. The oven slots back in, job done.
    There are several holes in each strip - You need to line them up to suit the fixing screws on the oven (or drill some new ones). Be careful when buying the strips - If you get a pack that has been opened, check to see if the two strips are a pair - They are "handed" - I had to pick over several packs at B&Q last time I needed a pair...
    Her courage will change the world.

    Treasure the moments that you have. Savour them for as long as you can for they will never come back again.
  • Leodogger
    Leodogger Posts: 1,328 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    edited 27 March 2022 at 4:07PM
    FreeBear said:
    B&Q (and other sheds) sell heat deflector strips that are intended for this job. Costs about £10 for a pair. Pull the oven out, cut the strips to length, attach to the front edge of the housing. The oven slots back in, job done.
    There are several holes in each strip - You need to line them up to suit the fixing screws on the oven (or drill some new ones). Be careful when buying the strips - If you get a pack that has been opened, check to see if the two strips are a pair - They are "handed" - I had to pick over several packs at B&Q last time I needed a pair...
    Do you mean you have to drill the oven housing itself?   My husband thought about doing that with a steel strip he bought but thought it might be dangerous as you don't know where in the oven housing all the electrics are?   By the way have you got a link to the item on B & Q because I have looked and can't find anything on there for the job.
  • grumbler
    grumbler Posts: 58,629 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    I'm pretty sure he meant the cabinetS60KU Heat Deflector Example for Kitchen



    IT Kitchens Stainless steel effect Mild steel Oven heat deflector kit  L603mm  DIY at BQ  - B&Q
  • Leodogger
    Leodogger Posts: 1,328 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    grumbler said:
    I'm pretty sure he meant the cabinet.S60KU Heat Deflector Example for Kitchen



    wo  - B&Q
    If you look at my picture, my oven is nothing like that and fixing it to the cabinet would not protect the door which is bevel edge and the oven door opens sideways from right to left as you are looking at it and the oven stands proud of the edge of the units, so that type of heat deflector I would say would not be suitable.  My oven is a stand alone, not a fitted integrated unit.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.7K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 452.9K Spending & Discounts
  • 242.7K Work, Benefits & Business
  • 619.4K Mortgages, Homes & Bills
  • 176.3K Life & Family
  • 255.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.