We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

USB charging sockets

Options
Can you get USB 3 wall sockets to speed up charging or is it only the device which is USB 2 or 3?

Comments

  • jamesd
    jamesd Posts: 26,103 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    USB3.0 and late has mandated support for higher charging currents and hence possibly faster charging. The change depends on the device:

    1. low power devices that use the SuperSpeed protocol get an increase fro 100mA to 150mA.
    2. high power devices that use the SuperSpeed protocol get an increase from 500mA to 900mA (4.5W)

    In addition there are two extra protocols that USB connections and devices can use:

    3. USB Battery Charging for up to 7.5W
    4. USB Power Delivery (USB PD) for up to 100W, depending on charger, device and cable. USB Power Delivery 2.0 was released as part of the USB 3.1 package. USB PD 3.0 supports programmable power supplies that can vary their output voltages because charging devices requires varying the voltage depending on the state of charge of the battery and this reduces the hardware needs at the device end. Not all USB PD 3.0 support PPS, it's an optional feature but a desirable one for new purchases.

    In addition there are lots of non-USB de-facto "standards" like Qualcomm's Quick Charge and QC support is very commonly provided because it's built in to many standard PD chips. The differences are how the devices communicate the available and demanded power and what the power limits and types are.

    I'm currently typing this on a tablet which is drawing up to 26W at 12V over a USB C port via the USB Power Delivery 1.0 specification. The charger is rated at 60W and the cable at 100W. Chargers may list only the PD 2.0 voltages but also support PD 1.0, like the one I'm using now and all of the others I've bought so far. A difference is no 12V in 2.0.

    Wall sockets and extension cables for mains power are unlikely to support the higher specifications. Plug in power adapters which do are already readily available.

    So long as the device and where required the cable support it the higher power sources do deliver faster charging, notably for the first 50-60% or so of charging.
  • IvanOpinion
    IvanOpinion Posts: 22,136 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Combo Breaker
    They are available - try an amazon search
    I don't care about your first world problems; I have enough of my own!
  • mobileron
    mobileron Posts: 1,218 Forumite
    Part of the Furniture 1,000 Posts
    Just installed a 4 usb 13amp socket works well.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.8K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.8K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.8K Life & Family
  • 257.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.