Approximate cost of double glazed window panels.

swingaloo2

I have 2 small side windows which are misting up and need replacement panels. I dont want to replace the entire windows as its not needed. Before I ring around for some quotes does anyone have any idea how much roughly I would be looking at to supply and fit. One is approx 38 inches by 16 inches, the other approx 42 inches by 33 inches. 
Im quite prepared for them to come along and say its better to have the entire windows replaced but want to avoid that if possible and as I have no idea at all what price I may be looking at I would like a rough idea so I know what's a good or bad quote. 

FreeBear

Had a sealed unit replaced not that long back. Similar size to your larger unit. Cost to me was £80, but the guy was also fitting new windows elsewhere on the house. So if you are wanted fitted, I'd take a guess at £100-120 each.

swingaloo2

Thank you very much. It gives me an idea if a quote is acceptable or not. Much appreciated.

greenface2

If your window is good no need to replace it . roughly about £150 . considering if its internally glazed . Into plastic or timber . even upstairs and down can make a difference in some glaziers eyes . Providing its not in a high risk and no toughened required BS6262 thats a ballpark , some firms like cloudy to clear work out price of unit double it and add 50 per unit that would work out expensive (£240) . Your units to sell retail are around 25 and 45  choose a local firm because they have to call twice . to measure and back to fit .

gazman100

I had roughly 1m x 1m double glazing unit replaced earlier this year for £155. Fitted into UPVC if it makes any difference.

Ant555

A recent quote I got for a 1000mm x 500mm was £80 fitted.

starving_artist

I had a 1200mm x 1200mm dg unit replaced last year.  Quote 1: supply only £230+VAT, supply and fit £390+VAT, Quote 2: supply and fit £550.  Both local glaziers.  London

wazza99

2ft x 1ft sealed unit £10 from my local place :-) fitted myself. I took out the beading, measured the old one, rang the supplier they made it and then i fitted it, hours job all in.