Manufacturers code on the inside of new triple glazed units?

Hi there,
I've recently just had new triple glazed units fitted in my home, and after they had been fitted I noticed that there's strange blue writing on the inside of each piece of glass. I thought this was quite strange (and an eye sore) so I queried this with the installer.
They are telling me that this is the manufacturers code and it has to be there to comply with building regulations, however this seems very strange to me. I would be very greatful if anyone could give me some advice on what this is and if it should really be there?
I've attached a picture of the writing in one of the units.
Thank you!
«1

Comments

  • mandy47
    mandy47 Posts: 366 Forumite
    Part of the Furniture 100 Posts Photogenic Name Dropper
    We had triple glazing installed last year. None of ours have any writing showing. Perhaps regs have changed recently.
  • EssexExile
    EssexExile Posts: 6,402 Forumite
    Tenth Anniversary 1,000 Posts Name Dropper Photogenic
    mandy47 said:
    We had triple glazing installed last year. None of ours have any writing showing. Perhaps regs have changed recently.
    Same here.
    Tall, dark & handsome. Well two out of three ain't bad.
  • Thanks for the replies, does it not look very strange?
    My thoughts were, even if there's new building regulations, why force this obtrusive text on everyone who has new windows installed?
    It almost looks as if there's no spacer coverings inside the units, but I'm no expert.
  • neilmcl
    neilmcl Posts: 19,460 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    Is the writing on the glass or on the inside edge of the unit, I can't tell from the pic.
  • @neilmcl The writing is definitely on the inside edge of the unit, since this is triple glazing, I guess it makes sense for this theory as it's displayed twice since there's 3 panes of glass.
    This is where I think the spacer bars should be? My old windows have silver spacer bars where this writing is on my new windows.
  • Forwandert
    Forwandert Posts: 1,211 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    We have this on our double glazed windows installed last year but it's in grey so doesnt stand out quite so much as yours. 
  • Hi,
    here's a close up:

  • Carrot007
    Carrot007 Posts: 4,534 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    We have this on our double glazed windows installed last year but it's in grey so doesnt stand out quite so much as yours. 

    I have it on double glazed units installed over the last 5/6 years. So it is probably a requirement. However mine are indeed also gray and also on the top or bottom where they are less visible also (you could argue the ones on the bottom are upside down I guess!), so probably arequirement but in OP's case badly placed and ridiculously visible. So probably only something you could do something about if you can argue the legs off a donkey. OP did you not see any example units first?
  • Rodders53
    Rodders53 Posts: 2,584 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    That's printed on the 'spacer bars' between the panes (often filled with dessicant to absorb any residual water vapour).
    https://www.glasscraftglass.com/sealed-units/triple-glazing/ seems to be a possible maker of the panes.  https://www.glasscraftglass.com/sealed-units/spacer-bartube/

    I've seen some with makers' date marks of DG units in the past but my current (newish) DG panes have none.

    https://www.nhbc.co.uk/binaries/content/assets/nhbc/tech-zone/nhbc-standards/tech-guidance/6.7/marking-of-insulating-glass-units-.pdf may be why they're marked that way...  but it may not be necessary for Building Regs / Fensa / other schemes?
  • ytfcmad
    ytfcmad Posts: 387 Forumite
    Part of the Furniture 100 Posts Name Dropper
    edited 17 March 2021 at 6:48PM
    It's there as part of the CE/Kitemarking  process, a legal requirement. As is the toughened glass stamp you will find in the corner of any toughened DGU, again a legal requirement.
    A good window fitter would fit the DGU's in an un-obtrusive way if he can.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.8K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.7K Work, Benefits & Business
  • 619.5K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.