📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Kitchen splashback glass or with an upgrade path

Options
2»

Comments

  • Emmia
    Emmia Posts: 5,674 Forumite
    Fifth Anniversary 1,000 Posts Photogenic Name Dropper
    tallac said:
    That's great suggestions, I guess even if the paint gets messed up then it's going to get covered up by the mirror glass splashback that I'd eventually like to get, so I wouldn't even really need to re-paint before putting the glass splashback on.

    Stainless steel splashback is a great shout for the hob area for the temporary solution. Thanks.
    I'd not go for mirror - that will show every mark and splash, we've got a petrol blue glass which is fairly shiny and reflects a bit, but doesnt highlight marks particularly.

    Do get some under cupboard lighting too (if you have them), as that really shows off the coloured glass.
  • Doozergirl
    Doozergirl Posts: 34,076 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Emmia said:
    tallac said:
    That's great suggestions, I guess even if the paint gets messed up then it's going to get covered up by the mirror glass splashback that I'd eventually like to get, so I wouldn't even really need to re-paint before putting the glass splashback on.

    Stainless steel splashback is a great shout for the hob area for the temporary solution. Thanks.
    I'd not go for mirror - that will show every mark and splash, we've got a petrol blue glass which is fairly shiny and reflects a bit, but doesnt highlight marks particularly.

    Do get some under cupboard lighting too (if you have them), as that really shows off the coloured glass.
    Antiqued mirror works well as a splash back as it has marks in it already.  
    Everything that is supposed to be in heaven is already here on earth.
  • Emmia
    Emmia Posts: 5,674 Forumite
    Fifth Anniversary 1,000 Posts Photogenic Name Dropper
    Emmia said:
    tallac said:
    That's great suggestions, I guess even if the paint gets messed up then it's going to get covered up by the mirror glass splashback that I'd eventually like to get, so I wouldn't even really need to re-paint before putting the glass splashback on.

    Stainless steel splashback is a great shout for the hob area for the temporary solution. Thanks.
    I'd not go for mirror - that will show every mark and splash, we've got a petrol blue glass which is fairly shiny and reflects a bit, but doesnt highlight marks particularly.

    Do get some under cupboard lighting too (if you have them), as that really shows off the coloured glass.
    Antiqued mirror works well as a splash back as it has marks in it already.  
    I've seen that type of effect and (personally) I think it just looks dirty and unclean (not exactly ideal in a kitchen) - but that's my opinion, I'm sure others love it, and would not like my coloured glass splashback!
  • Forwandert
    Forwandert Posts: 1,211 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    edited 30 December 2020 at 10:05PM
    We had the mirrored splashbacks installed last year. Wrapped around 3 walls and each side of the kitchen window. Most of the way round apart from the cooker hob (which is full fit) is only about 400mm, mainly due to that's the point on one side wall where the stairs are in the ceiling and start showing. We kept it raised with upstands to avoid anybody sliding anything on the worktop and cracking them. NW England but total cost with 5 double socket cut outs was just over £800.

    I was worried about them showing marks and splashes but very easily kept under control with microfibre cloths. I think they're easier to keep clean than tiles.

    Only issue is keeping the worktops clear or you see any mess from every angle.
  • silvercar
    silvercar Posts: 49,587 Ambassador
    Part of the Furniture 10,000 Posts Academoney Grad Name Dropper
    Paint the walls and add Perspex sheets until you can afford your first choice. A friend did this and I thought it was glass.
    I'm a Forum Ambassador on the housing, mortgages & student money saving boards. I volunteer to help get your forum questions answered and keep the forum running smoothly. Forum Ambassadors are not moderators and don't read every post. If you spot an illegal or inappropriate post then please report it to forumteam@moneysavingexpert.com (it's not part of my role to deal with this). Any views are mine and not the official line of MoneySavingExpert.com.
  • tallac
    tallac Posts: 416 Forumite
    Fourth Anniversary 100 Posts Name Dropper
    We had the mirrored splashbacks installed last year. Wrapped around 3 walls and each side of the kitchen window. Most of the way round apart from the cooker hob (which is full fit) is only about 400mm, mainly due to that's the point on one side wall where the stairs are in the ceiling and start showing. We kept it raised with upstands to avoid anybody sliding anything on the worktop and cracking them. NW England but total cost with 5 double socket cut outs was just over £800.

    I was worried about them showing marks and splashes but very easily kept under control with microfibre cloths. I think they're easier to keep clean than tiles.

    Only issue is keeping the worktops clear or you see any mess from every angle.
    That's a really good price. Do you remember what company you used and if they cover the whole of the UK?
    Emmia said:
    I'd not go for mirror - that will show every mark and splash, we've got a petrol blue glass which is fairly shiny and reflects a bit, but doesnt highlight marks particularly.
    Do get some under cupboard lighting too (if you have them), as that really shows off the coloured glass.
    I'd rather, see the marks/splashes so I can clean them. Same reason why I've gone for tiles and laminate flooring throughout the house rather than carpet.
  • Emmia
    Emmia Posts: 5,674 Forumite
    Fifth Anniversary 1,000 Posts Photogenic Name Dropper
    silvercar said:
    Paint the walls and add Perspex sheets until you can afford your first choice. A friend did this and I thought it was glass.
    Is perspex safe behind the hob though? 
  • FreeBear
    FreeBear Posts: 18,259 Forumite
    Tenth Anniversary 10,000 Posts Name Dropper Photogenic
    Emmia said: Is perspex safe behind the hob though? 
    If it is an induction hob, you could get away with it... With a gas hob, there would be a very real fire risk - Any splashback behind a hob should be fire resistant.
    Her courage will change the world.

    Treasure the moments that you have. Savour them for as long as you can for they will never come back again.
  • I’ve bought 3x splash backs from this company (2 in my house, 1 in my dads). From memory the last one was about £75. No issues whatsoever and not a bad price for a temporary solution.

    https://www.premierrange.co.uk/glass-splashback-in-premier-colours-made-to-measure?width=600&height=750
  • tallac
    tallac Posts: 416 Forumite
    Fourth Anniversary 100 Posts Name Dropper
    FreeBear said:
    Emmia said: Is perspex safe behind the hob though? 
    If it is an induction hob, you could get away with it... With a gas hob, there would be a very real fire risk - Any splashback behind a hob should be fire resistant.
    I've got a gas hob so I'll still with the stainless steel temporary solution. I'm sure I'll think of a good use for it after it's served it first purpose.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.