We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Stapling stair runner

Options
2»

Comments

  • gwynlas
    gwynlas Posts: 2,236 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Whilst I applaud that you are keen to tackle this yourself given the difficulties of cutting and fixing on winders I would get a professional in. Straight stairs are not an issue but would you be prepared for an potential accident to happen if carpet came loose through regular use?
  • rach_k
    rach_k Posts: 2,254 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    edited 22 October 2020 at 10:03AM
    Mickey666 said:
    Uk1982 said:
    Thank you both for the answers.  I can't quite visualise how gripper rods would hold the carpet tightly under the nose of each stair. Would I put one at the back of each tread, and then maybe one at the top and bottom of each riser? 
    There is no need to hold the carpet tightly under the nose of each tread.

    Maybe this depends on the look you're going for.  On our stairs, the fitters used gripper rods for the main flight of stairs and allowed the carpet to hide the overhang, but the bottom of each flight has one wider step.  On each bottom step, they fitted the carpet tightly into the overhang.  I've had a poke around and I think they have used some kind of tack or small nail, it's not a staple.  Is that an option, UK1982?

    Or would stair rods work instead?
  • Uk1982
    Uk1982 Posts: 23 Forumite
    Sixth Anniversary 10 Posts
    Unfortunately we are constantly ripping up and replacing bits of carpet due to darling cat weeing on everything (this is an issue we are tackling separately with the help of the vet) so I'd prefer to do it myself, I anticipate that I will need to replace the carpet on individual stairs every now and again. 
    I am not bothered if it takes me weeks to get it right, I like doing this sort of thing, but I don't want it to be unsafe so I will give it some more thought!  Thank you for all the replies, it is much appreciated. 
  • twopenny
    twopenny Posts: 7,528 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    If you are needing to replace individual bits of stair carpet this is going to be a bid dodgy safetywise. A lot will depend on the type of carpet you use as most will work loose from tacks or staples.
    The most likely to stay put are the ones with hessian backing.
    And the safest way possibily would be to put only on the treads. Use a good double sided tape plus the fixer. This would allow you to lift and replace easily.

    I can rise and shine - just not at the same time!

    viral kindness .....kindness is contageous pass it on

    The only normal people you know are the ones you don’t know very well


  • babyblade41
    babyblade41 Posts: 3,962 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    edited 22 October 2020 at 1:18PM
    I have done it on some stairs I had .. a hand stapler won't be any use  . 


    The sensor lights are so my dog doesn't fall down the stairs .. the brass rods were about 10.00 each and the brass rail was quite expensive .  I chose a sisal type runner for its hard wearing properties
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.