We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Condensation and Damp - Another tale of woe!
Comments
-
If that's the same Maeco dehumidifier that I've got it'll suck out a huge quantity of water super quickly. Keep a record of how much so you can report back to your landlord.Remember to keep the windows closed when you're using it.0
-
stragglebod said:If that's the same Maeco dehumidifier that I've got it'll suck out a huge quantity of water super quickly. Keep a record of how much so you can report back to your landlord.Remember to keep the windows closed when you're using it.0
-
You don't need the humidistat set to 40, 60-65 is better for your health and will not allow mould to grow.The comments I post are my personal opinion. While I try to check everything is correct before posting, I can and do make mistakes, so always try to check official information sources before relying on my posts.0
-
tacpot12 said:You don't need the humidistat set to 40, 60-65 is better for your health and will not allow mould to grow.0
-
Does that radiator work ok? If so, you could always have it set low with the rest of the house's rads shut off/down so that there's a few extra degrees of heat around that wall without making your bedroom unpleasantly warm - just setting the rad to little more than luke-warm should do.
If that doesn't sort it, I guess it could well be penetrating damp from outside.0 -
Having a plinth at the base of a wall often causes damp issues, especially on a solid wall, which yours probably is.0
-
TranquilityBase93 said: It's a slated roof, but I can provide a proper picture of that in the morning. On that subject, we've noticed that a few of the slates have come loose and that may potentially be the source of water?There is a broken slate on one of the window sills - Slipped & broken slates will most certainly be one source of water ingress.The moss growing on the concrete around the bay suggests that there is quite a bit of moisture around - If there are other downpipes discharging water directly on to the concrete, it will only exacerbate the problem.Not seeing any evidence of a DPC in any of the photos. It could be hidden behind the plinth, but that would mean that the concrete is way too high. As you don't own the property, I wouldn't suggest you do anything to the fabric of the building - Finding another property that is easier to heat and doesn't suffer from damp/condensation would be my recommendation.Any language construct that forces such insanity in this case should be abandoned without regrets. –
Erik Aronesty, 2014
Treasure the moments that you have. Savour them for as long as you can for they will never come back again.0 -
With the amount of moss growing there it looks like that area doesn't get much sun which won't help with drying the wall out at all.
The worrying thing is that this problem is so bad now when we are not even into the colder winter months yet and it has been warm and dry for months. It is only going to get worse as we go through into winter unless the source of the damp is rectified. The dehumidifier is certainly going to help and make a big difference to the air quality and mould growth but it isn't going to fix the cause of the damp in the first instance.0
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 352.1K Banking & Borrowing
- 253.5K Reduce Debt & Boost Income
- 454.2K Spending & Discounts
- 245.1K Work, Benefits & Business
- 600.7K Mortgages, Homes & Bills
- 177.5K Life & Family
- 258.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.6K Read-Only Boards