We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Kitchen cupboard internal drawers

Options
Hi. I have a lower kitchen cupboard that I would love to add internal drawers to. I think it is Magnet tatton and is a standard 600mm wide unit. I use the lower half is used to store my pots/pans etc but the upper half is just awkward space that is not easy to utilise and access everything and drawers would make it much more usable. It unfortunately has an isolation power switch at the back near the bottom for my kickspace heater so I'm not sure if I could add a pan drawer there.

Any suggestions of where best to get internal drawers at a reasonable price and what my options are? Also tips on hinges as mine are the standard softclose ones that only open to 90 degrees so I guess may well need changing too.

Thanks in advance!
Mortgage free as of 12/08/20!
MFiT-5 no 45
You can't fly with one foot on the ground!

Comments

  • Robin9
    Robin9 Posts: 12,795 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    You might be better off with 3/4 mesh baskets which slide in runners attached to the sides.
    Never pay on an estimated bill. Always read and understand your bill
  • jennifernil
    jennifernil Posts: 5,712 Forumite
    Part of the Furniture 1,000 Posts
    Try a company called Trade Hinges and look at their DIY drawer kits, you can make any width of drawer you need.  If you pack out the hinge side runner you can keep the same hinges, or get wider  opening ones.
    Fixed size drawers often come in different depths if you need to leave space at the rear of the cupboard.
  • taka
    taka Posts: 3,483 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    Thanks for that Jennifernil.
    Mortgage free as of 12/08/20!
    MFiT-5 no 45
    You can't fly with one foot on the ground!
  • FreeBear
    FreeBear Posts: 18,245 Forumite
    Tenth Anniversary 10,000 Posts Name Dropper Photogenic
    edited 29 August 2020 at 11:11AM
    Blum do a range of internal drawer units that take in to account door hinges - https://www.drawerboxes.co.uk/blum-tandembox-internal-kitchen-drawers-c102x2276411
    (not a recommendation, just the first page that came up in a search - Other suppliers available).

    Her courage will change the world.

    Treasure the moments that you have. Savour them for as long as you can for they will never come back again.
  • Be_Happy
    Be_Happy Posts: 1,392 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    I had my kitchen refitted 2 years ago.  Had existing shelves in units replaced by pull out wire shelves from Wickes.  Has made a tremendous improvement to accessing things.  Brackets hold the shelves far enough out to clear hinges, so it's just a matter of checking sizes.  Have seen similar things on Amazon.
  • jennifernil
    jennifernil Posts: 5,712 Forumite
    Part of the Furniture 1,000 Posts
    edited 30 August 2020 at 10:09AM
    My OH has made about 20 of these drawers recently, plus some plinth pods previously, using the drawer kits and free panels from local IKEA, plus buying a nice front panel, as the drawer box sizes in the ready made ones were not  suitable in width,  but if they will fit then it is a much easier option.

    We  have also in the past used ready made IKEA drawers where the depth required was available.  Though IKEA units are deeper, their drawers are not so deep, so it pays to check the dimensions first.

    If anyone needs to know how much depth an IKEA drawer needs, I have several here I can measure, though mine are not internal drawers, but they are pretty similar.  We had to reduce the depth of some IKEA units to fit a restricted space, and an existing worktop, so looked into all this not so long back.
  • Trace-T
    Trace-T Posts: 47 Forumite
    Part of the Furniture 10 Posts Photogenic Name Dropper
    FreeBear said:
    Blum do a range of internal drawer units that take in to account door hinges - https://www.drawerboxes.co.uk/blum-tandembox-internal-kitchen-drawers-c102x2276411
    (not a recommendation, just the first page that came up in a search - Other suppliers available).

    You can also buy these from Clutterfree Kitchens. I recently purchased some Tandombox deep drawer box sides
     from them.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.