Insulation Grants Historical

oldwiring

I cannot find a slot where this thread will sit comfortably, so Mods, please move at will.
I need to find, what government backed cavity wall and loft insulation scheme was in operation in 2008 with its standards.
Google is no help, as it seems to have limited memory.
All help will be greatly appreciated.

markin

Warm front grants ended in 2013, the only number below is loft at 270mm thick.

"If your grant is approved you will be visited by an assessor who will discuss the energy improvements available under the Warm Front scheme, and recommend changes to your heating and insulation systems. These improvements can cost up to a total of £3,500 (or £6,000 if oil central heating is involved). Occasionally the grant will not cover the full cost of the work. In this case, you will be advised by letter, and you will have the option of whether to go ahead with the extra work.

"Some of the improvements that the Warm Front Grant can provide are:

Central heating systems

If your central heating system needs replacing, a Government approved installer will put in a condensing boiler, and up to six radiators including all valves and pipe work, providing heating in at least five main living areas. It usually takes about two days to install a new central heating system. Alternatively, (s)he may repair your existing heating system or fix your boiler. The Warm Front installer will advise you regarding the requirements for your property. Under the scheme your solid-fuel open fire could also be converted to a glass-fronted fire.

Loft insulation

This will make your home more energy-efficient by preventing heat escaping through the roof. The installer will fit two layers of insulation in the loft, ensuring that the insulation is about 270mm thick. He will also insulate the water tanks and pipes in the loft.

Draught proofing

The installer will fit plastic strips to all windows and outside doors to prevent heat from escaping. Doors will have plastic strips fixed to the top and the two sides, and a brush fixed to the bottom. Draught proofing will not be fitted to double glazed windows and doors as it isn’t suitable for them.

Cavity wall insulation

To fit cavity wall insulation, the installer will have to drill a number of small holes into the walls, and inject them with insulation material, so there will be some noise and dust. However, the installer will refill the holes when (s)he has finished. By filling the space between your cavity walls with insulation, heat loss will be reduced.

Hot water tank insulation

The assessor will check the insulation around your hot-water tank to ensure that it meets the required standard. This will help to avoid heat loss, ensuring that the water stays hot for longer. If necessary they will recommend a new jacket."

oldwiring

Thanks, markin, but I did say historical. I want to know, what was on offer in 2008 for my personal reasons.

jamesperrett

Might be worth taking a look at
https://www.moneysavingexpert.com/tips/2008/
I know that we had free cavity wall insulation installed around that time. We could have had loft insulation too if we didn't already have it.

markin

oldwiring said:

Thanks, markin, but I did say historical. I want to know, what was on offer in 2008 for my personal reasons.

It is historical "Warm front" grants ended in 2013  A quick google seems they started in 2005.

This pdf seems to cover a lot.

"Between June 2005 and March 2008, the Scheme helped over 635,000 households"

https://publications.parliament.uk/pa/cm200809/cmselect/cmpubacc/350/350.pdf