Flashing lights Indesit washer/dryer help please

maz16

im sure you will get a boch cheaper than that and you get 2 or 3 yrs free gaur

Taffyscot

maz where are you? I am in largs, ayrshire. Strange old world this isn't. NO wonder you are such a help you are a genius I hope you are close by. Wouldn't know where to look for reconditioned ones. Did look on ebay and some some stunners bosch miele going cheap but by the time I pay someone to pick up and install thought it would add up to a lot. Let me know ok. thanks

maz16

:rudolf: sorry taffy we are in stirling bit too far for us but up here most good engineers will sell refurb machines but make sure you get a gaurantee min 6mths and appro 80.00 good luck to you and merry christmas im on here trying to get a wii for my son

Taffyscot

awwww maz thought I had hit pay dirt then. Hope you find what you are looking for. Do you go on uk hot deals? It seems to have all that techie stuff on there. Good luck

rushman1uk

I had this problem last night. I took the washer out side this afternoon, unscrewed the filter plug at bottom of machine. Cleaned the filter under the tap, re-asmebled the washer & now seem to be working. On to my 3rd load tonight.

phill99

rushman1uk wrote: »

I had this problem last night. I took the washer out side this afternoon, unscrewed the filter plug at bottom of machine. Cleaned the filter under the tap, re-asmebled the washer & now seem to be working. On to my 3rd load tonight.

And why are you commenting on a 4 year old post? Idiot.

rotfil

Because phill99 / d!ckweed this is the first result that pops up on Google and when you have a broken Indesit all you need is help, and logically you want to follow on the conversation... If that's too much for you why don't you throw yourself off of a bridge.

For everyone else here are a list of error codes and there relevant meanings for the WIDL126 - lights flashing from left to right are numbers 1-4

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light

Poppy_Golightly

I too having been surfing the net trying to get help to sort out the flashing lights on my Indesit WIL163 which won't spin. This thread has been the most helpful - better than any so called professional site. Should have come here first! Thank you so much rotfil for posting the error codes - will tackle the machine again in the morning. All digits crossed