We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Fix or replace multi fuel stove door

Two of the bolts holding the glass onto the front of our stove have snapped. Is there a way to fix this, or replace the door as it can't be used now as it won't hold the glass securely.

The only place I can see online for replacement doors are almost as expensive as replacing the full stove.

Comments

  • Probably, if you just need a couple of replacement bolts a decent proper ironmonger should be able to find them.

    Or a metalworker with a screwcutting lathe could turn some up.

    If the manufacturer is still going/identifiable they might send you a couple of bolts if you ask nicely, or at least tell you the thread size.
    A kind word lasts a minute, a skelped erse is sair for a day.
  • kaggi
    kaggi Posts: 256
    Part of the Furniture 100 Posts Name Dropper Combo Breaker
    Forumite
    Thanks. This issue is that the bolts have snapped so part of them are in the door still so we can't see how to put new bolts in there.
  • greyteam1959
    greyteam1959 Posts: 4,831
    Part of the Furniture 1,000 Posts Name Dropper
    Forumite
    I presume the bolts have snapped off & you cant get the broken thread out ??
    If so then things get difficult.
    If not you should be able to find some bolts somewhere.
    Post up your stove make, model & a serial number if you can.
    Some nice person will sort it for you.
  • FreeBear
    FreeBear Posts: 18,888
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Forumite
    Probably, if you just need a couple of replacement bolts a decent proper ironmonger should be able to find them.

    Or a metalworker with a screwcutting lathe could turn some up.

    Unlikely anyone would want to spend time screw cutting bolts unless they are an extremely unusual design - I wouldn't. The bolts are most likely metric, so an off-the-shelf pack from Halfords, B&Q, or a local ironmonger would do.

    The difficulty is in getting the remains of the old bolts out. These will need to be carefully drilled out and the threads cleaned up with a tap. Do NOT use one of those bolt extractor things. When you break one, which you will do, the remains have to be spark eroded out. Very expensive job, that few people can do.

    Depending on location, I may be able to help with drilling out the bolts and might even have replacements on the shelf.
    Any language construct that forces such insanity in this case should be abandoned without regrets. –
    Erik Aronesty, 2014

    Treasure the moments that you have. Savour them for as long as you can for they will never come back again.
  • Jackmydad
    Jackmydad Posts: 9,186
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    Forumite
    FreeBear's post above is the way to go. I've done it a time or two myself for other people.
    The OP certainly doesn't need a new door yet.
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 355.7K Banking & Borrowing
  • 254.9K Reduce Debt & Boost Income
  • 456.1K Spending & Discounts
  • 248.3K Work, Benefits & Business
  • 605.8K Mortgages, Homes & Bills
  • 179K Life & Family
  • 263.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.