We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Disconnecting Gas Hob - do I need Gas Safe engineer?

Options
135

Comments

  • Keep_pedalling
    Keep_pedalling Posts: 20,741 Forumite
    Tenth Anniversary 10,000 Posts Name Dropper Photogenic
    Personally I would get it capped and the service valve removed as it is a potential source of leak. In which case I would not DIY it.
  • Norman_Castle
    Norman_Castle Posts: 11,871 Forumite
    Part of the Furniture 10,000 Posts Photogenic Name Dropper
    bris wrote: »
    Your can't work on gas even in your own home if you are not gas safe registered. When they say competent they mean by way of gas safe registration.

    If qualification is the measure of competence why not state, must be qualified?
  • stragglebod
    stragglebod Posts: 1,324 Forumite
    1,000 Posts Second Anniversary Name Dropper
    That isn’t quite what I said.. but, being an electrician, sometimes I have to work in a kitchen with other people.. :T
    Oh, so you sometimes you work in the same room as people who know what they're doing?

    My friend works as cabin crew, which means often spending time in the cockpit while the pilots are there doing their piloty thing. I guess that means she's 'competent' to fly the plane then?

    You don't seem to place any value on your fellow tradesmens' training, skills or experience. I wonder if that's a reflection of the level of professionalism you bring to your own work?
  • Shaun is correct. I don't normally like to get into this debate because there are usually strong views on it.

    Of course if you're not competent you should leave it up to a professional. But the idea that only a gas safe engineer can do the work is something that's been pushed by Gas Safe.
  • Risteard
    Risteard Posts: 2,000 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    MarcTJTD wrote: »
    Even if it's in your own home
    Not actually true. If it's not being done for reward then it isn't illegal despite what some gas plumbers might try telling you.

    This, of course, is not to suggest that it's advisable.
  • Risteard
    Risteard Posts: 2,000 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Why does being an electrician make you competent at gas work?

    Why do plumbers (including gas plumbers) think they're competent to do electrical work? They are always wholly incompetent at it.
  • Risteard
    Risteard Posts: 2,000 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    no different from me not being able to issue a minor works certificate
    If you alter any circuit then you are required to issue a Minor Electrical Installation Works Certificate (MEIWC) by BS7671:2018 (IET (IEE) Wiring Regulations, 18th Edition - Requirements for Electrical Installations). If you are not competent to do this then you shouldn't be attempting any electrical work in the first place.
  • southcoastrgi
    southcoastrgi Posts: 6,298 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    Risteard wrote: »
    If you alter any circuit then you are required to issue a Minor Electrical Installation Works Certificate (MEIWC) by BS7671:2018 (IET (IEE) Wiring Regulations, 18th Edition - Requirements for Electrical Installations). If you are not competent to do this then you shouldn't be attempting any electrical work in the first place.

    I've got one of those volt testers with the light in it to make sure it's turned off 1st
    I'm only here while I wait for Corrie to start.

    You get no BS from me & if I think you are wrong I WILL tell you.
  • Ectophile
    Ectophile Posts: 7,970 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    Risteard wrote: »
    If you alter any circuit then you are required to issue a Minor Electrical Installation Works Certificate (MEIWC) by BS7671:2018 (IET (IEE) Wiring Regulations, 18th Edition - Requirements for Electrical Installations). If you are not competent to do this then you shouldn't be attempting any electrical work in the first place.


    But despite containing the word "regulations", the IEE Wiring Regulations aren't actually the law. They are just a British Standard, that you can choose to follow, or not. Though if the work is notifiable, then not following them may cause more trouble than it's worth.



    The law in domestic properties would be Building Regulations Part P, which says remarkably little.


    Other laws, such as the Health & Safety at Work Act, and the Electricity at Work regulations may also apply.
    If it sticks, force it.
    If it breaks, well it wasn't working right anyway.
  • Just a quick update for everyone, especially after the ridiculous cabin crew posts, please bare in mind I’m only blanking a pipe, not building my own power plant.

    Well, I’ve had gas safe engineer in, you’ll never guess what.. he’s blanked the pipe, turned the valve off & did a quick pressure test, I’m now £60 down for my incompetence *sigh*. Sometimes you should trust your gut & not some people on a forum, oh well .. I have a piece of paper now incase the chief of regulations ever comes knocking.

    I think I’ll get a job as cabin crew next, be flying the plane the week after I’m sure.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.8K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.8K Life & Family
  • 257.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.