Fireplace Space

SavvySaver24

We have recently moved into a property that had just the fireplace 'hole' left if that makes sense. We had the walls rendered and plastered but we need to sort out the fireplace floor.

Currently this is just a really uneven concrete surface so first job is to flatten that out. What is best to do this with?!

There is then a 2cm gap between the end of the concrete and the start of the laminate floor. How can we fill this?

We don't intend to put any fire back in, we will probably just put hurricane lamps or similar in there, but has anyone tiled the inaide of their fireplace floor? Anyone just using it as a feature "hole" what does your floor in it look like?

FreeBear

Your best bet is to try and find a matching strip of laminate to fill the gap. For the concrete, chisel as much out as you can and then lay some tiles flush with the laminate. You'll probably want to install a transition strip to allow for movement in the laminate (it may even hide the 20mm gap).

I know of several people that have made a fireplace opening a "feature" and use the space for storage. With the right decor, it can look quite good.

Ectophile

You can buy self levelling compound, which is intended to even up lumpy concrete. It's essentially quick setting runny cement.


But it seems to come in big bags or tubs. Rather too much for one fireplace.