We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Radiators and sizes

Hi

I’m replacing all radiators in the bedrooms and in the main bedroom we have a fairly long radiator - it’s just over 2m long....I’ve looked at most of the places where they sell radiators but can’t seem to find anything at 2m

I’m assuming this is a non standard size and would have to change all pipes etc to get a new one to fit....grrrhhhh

Comments

  • MX5huggy
    MX5huggy Posts: 7,170 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Stelrad make 2000mm rad in various sizes, https://www.stelrad.com/wp-content/uploads/2015/04/21351_Elite_Web-2.pdf

    Having said that the output from one of these could be significantly higher than your current rads get the rads sized correctly (that is the heat output matched to the requirement of the room) . Adjusting the pipes is not really a big deal
  • Unless you live in Buck House a 2m rad in a bedroom is huge
    I'm only here while I wait for Corrie to start.

    You get no BS from me & if I think you are wrong I WILL tell you.
  • aj9648
    aj9648 Posts: 1,388 Forumite
    Part of the Furniture 500 Posts
    Yes I know. It’s really old and is imperial so need a new one.

    Moving the pipes is a night mare as it’s like spag junction down there!!
  • FreeBear
    FreeBear Posts: 18,306 Forumite
    Tenth Anniversary 10,000 Posts Name Dropper Photogenic
    aj9648 wrote: »
    Yes I know. It’s really old and is imperial so need a new one.

    http://www.simplifydiy.com/plumbing-and-heating/radiators/power will give you some idea of the rating of the current radiator. Being an old one, you'll probably want to replace the valves at either end. You will find the existing nuts will be a different thread, so will need to get them off somehow - Using an adjustable wrench as a slide hammer will often work to get both the nut and olive off. That said, if you fit a smaller radiator, the pipes will be cut anyway.
    Any language construct that forces such insanity in this case should be abandoned without regrets. –
    Erik Aronesty, 2014

    Treasure the moments that you have. Savour them for as long as you can for they will never come back again.
  • aj9648
    aj9648 Posts: 1,388 Forumite
    Part of the Furniture 500 Posts
    So spent most of the day looking at radiators. There is a showroom half hour away and once I told the sales person my dimensions I was given a nice little quote of £2k to buy new radiators. This was mostly due to the fact mrs was with me and she picked the most expensive one (or close to it)

    It looks like I will have to move the pipes as the sizes required, given the size of rooms is different to what I have at the moment. It is a good job I have gutted the rooms - no carpets are on and the old rads are already off

    Any suggestions of some more 'cost effective' places I can get designer radiators - never knew there was such a thing.

    Thanks
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.4K Banking & Borrowing
  • 253.7K Reduce Debt & Boost Income
  • 454.4K Spending & Discounts
  • 245.4K Work, Benefits & Business
  • 601.2K Mortgages, Homes & Bills
  • 177.6K Life & Family
  • 259.3K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.