Would this be ok with electric heater?

pennypincher2013

http://www.argos.co.uk/product/8376688

I have a 2.4kw heater. I'm looking for an extension lead that is 2m long with one socket. I currently have a 2 socket, 5m lead but am worried because it is coiled up or if undone could be a trip hazard.
Could this one be ok since there's an option to switch the individual sockets on and off?

spadoosh

Yes it will work.

Be careful about overloading though by using the other sockets. The most that extension lead can take is about 3kw. So probably best just avoiding plugging anything else in there.

pennypincher2013

thanks! I've found this one as well: http://www.argos.co.uk/product/9820645
Def won't be using the other sockets

Head_The_Ball

Both your extension lead options will work but a better, (and probably much cheaper) solution would be to replace the captive flex on the electric fire with one of a longer length.

Provided you can easily and safely open up the fire to access the flex entry point, this is an easy job for a DIYer with basic electrical knowledge.

If the flex is attached inside the fire with screws that isn't much harder than wiring a plug. If it is soldered then you need a soldering iron and the ability to use it safely.

Only do this if you are certain that you know what you are doing. Make sure that the flex is the right specification.