Internal Door Heights

dickibobboy

Good Evening,

I've been looking around for some internal doors and found some cheapish ones at Wickes that fit the bill, for 4 out of 5 frames the width and heights are spot on.

https://www.wickes.co.uk/Wickes-Geneva-Oak-Cottage-5-Panel-Internal-Door---1981mm-x-762mm/p/214699

For one frame however the floor to top frame height is 2010mm which leaves 29mm. The floor height is in one room is only 10mm tiles and the other side of the room will be carpet with 9mm underlay.

I have no option to drop the architrave as it's all fresh on and glued to the frame and I didn't really want to have to pack the top of the frame out either.

All the other doors I can see from other suppliers match the height but are 813mm wide over the 762mm that the frames are.

Really annoying as the doors at Wickes are just what I need and on offer but don't seem to offer any doors above the standard 1981mm height!

Any advice?

Thanks

Andy123.

The 2010 height of the door frame includes the thickness of the door frame aswell.

So your 1981mm door + a 27mm door frame = 2008mm so will work fine