Install soffit lights

Options
wroenaldinho
wroenaldinho Posts: 100 Forumite
Hi All,

Im looking to install some soffit lights on the lowest level of soffit on my house. I'm trying to work out the best way of wiring it into the circuit.

I want to install 4 x IP65 downlights. I also want to wire in a dusk until dawn sensor with timer built in. The 4 lights will the run off this sensor and there will be no other physical switch to override this.

Has anyone done this? If so where did you take the power from?

Thanks

https://drive.google.com/file/d/1JBL3hzYFDE413zFne6xLMREHDZBmBAWo/view?usp=drivesdk

This is the soffit ^^^

view?usp=drivesdk

https://drive.google.com/file/d/1pPFwhW3cExn7hIkXq-bEdX5cdqhThQul/view?usp=drivesdk

This is where I will install the sensor ^^^

Comments

  • chrisw
    chrisw Posts: 3,438 Forumite
    Name Dropper First Post First Anniversary
    Options
    I did something similar and took the power from the outside light near the front door. I included that in the circuit as well so they all come on dusk to dawn. They all use low power LEDs of a couple of watts each.

    This means they can also be separately switched if necessary by using the outside light switch.
  • brightontraveller
    Options
    Hi All,

    Im looking to install some soffit lights on the lowest level of soffit on my house. I'm trying to work out the best way of wiring it into the circuit.

    I want to install 4 x IP65 downlights. I also want to wire in a dusk until dawn sensor with timer built in. The 4 lights will the run off this sensor and there will be no other physical switch to override this.

    Has anyone done this? If so where did you take the power from?

    Thanks

    https://drive.google.com/file/d/1JBL3hzYFDE413zFne6xLMREHDZBmBAWo/view?usp=drivesdk

    This is the soffit ^^^

    view?usp=drivesdk

    https://drive.google.com/file/d/1pPFwhW3cExn7hIkXq-bEdX5cdqhThQul/view?usp=drivesdk

    This is where I will install the sensor ^^^
    If you have to ask where to take the power from that screams your really not competent to do the work…
    Alas nobody knows your installation, the type of fitting, cable size, loading, routing etc if its moronic guesses your after I’ll start you with "National Grid " I'm sure some more will be along soon

    :rotfl:
  • Furts
    Furts Posts: 4,474 Forumite
    edited 29 May 2018 at 9:45AM
    Options
    The soffit looks like it has been overclad. If so what is behind it - asbestos board? The house looks fairly modern but there is no guarantee here .

    Are soffit lights really the priority or should you first be maintenance like repairing the mortar bedding under the tiles? If you start drilling the soffit it looks like these could fall away. Even the downpipe joint is bodged - is it leaking, or has it just been hacked at then glued? Plus there are no brackets to take the outlet.

    The golden rule with homes is always tackle the important things and then decide on fads, fripperies, and such like if there is still money left over.
This discussion has been closed.
Meet your Ambassadors

Categories

  • All Categories
  • 343.4K Banking & Borrowing
  • 250.2K Reduce Debt & Boost Income
  • 449.8K Spending & Discounts
  • 235.6K Work, Benefits & Business
  • 608.5K Mortgages, Homes & Bills
  • 173.2K Life & Family
  • 248.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 15.9K Discuss & Feedback
  • 15.1K Coronavirus Support Boards