1.5 bowl kitchen sink recommendation

barker77

I have a max budget of £200 to spend and have narrowed it down to these 2 sinks.

https://www.johnlewis.com/clearwater-zumba-1-5-bowl-inset-kitchen-sink-stainless-steel/p3262625

or

https://www.screwfix.com/p/franke-ascona-inset-sink-18-10-stainless-steel-1-5-bowl-1000-x-510mm/37197

Needs to fit in a 600 unit and be of good quality - dont want it to bend as have a tall tap I plan on fitting.
Grateful for advice and happy for other recommendations although I like the look of the 2 above so advice on those would be ideal!

Thanks

barker77

Sorry to bump but keen to get this ordered

missile

Both are good sinks and will fit inside 600 base unit. I have fitted Frankie before and can recommend their products.

don't want it to bend as have a tall tap I plan on fitting.

No sink will bend if it is properly installed. Are you DIY?

barker77

Buying myself but got a kitchen fitter putting it in so hopefully all good.

Neverheard of clearwater before nor can I find a website which worried me, but is thicker than the Franke so was assuming that meant it was better?

Ruski

Also fit a tap brace then

HTH

Russ

barker77

Will the tap brace come with the sink?

Ruski

barker77 wrote: »

Will the tap brace come with the sink?

Nope, freely available from B&Poo and the like - just Google it.

HTH

Russ

barker77

Ruski - Any preference on the 2 sinks?

Ruski

I Always fit Franke - that particular model has an 'innovative' clip in system - your fitter needs to be very accurate with the cutout as it's basically a one hit fit, not the 'traditional' screwed clips.

HTH

Russ