📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Oven size

Options
Are fitted single ovens a "standard size" ?
ie) approx 70Litres internal - will any single oven fit as a replacement ?

Comments

  • tonyh66
    tonyh66 Posts: 1,736 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    generally yes, check the dimensions of the one you want to buy, they are designed to fit a 600mm wide cabinet.
  • cranford
    cranford Posts: 797 Forumite
    Tenth Anniversary 500 Posts Name Dropper
    edited 17 March 2018 at 10:41PM
    As I found out recently the height and width are fairly standard but the depths can vary a lot. Because of obstructions at the back due to gas fittings for the hob you would need to measure this. In my case I needed a 52cm depth oven and the hob connection was 6cm down from the top and 10cm across. Some ovens have a slope or cut out to accommodate this.
    I went to Curry's and they could not tell me the depths!
    I ended up looking at the AO web site that has all the information.
    I ended up buying one of these from a cheaper retailer.
    https://ao.com/product/seb600fp-stoves-electric-single-oven-stainless-steel-22495-45.aspx and as you can see there is a size diagram.
  • 50Twuncle
    50Twuncle Posts: 10,763 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    cranford wrote: »
    As I found out recently the height and width are fairly standard but the depths can vary a lot. Because of obstructions at the back due to gas fittings for the hob you would need to measure this. In my case I needed a 52cm depth oven and the hob connection was 6cm down from the top and 10cm across. Some ovens have a slope or cut out to accommodate this.
    I went to Curry's and they could not tell me the depths!
    I ended up looking at the AO web site that has all the information.
    I ended up buying one of these from a cheaper retailer.
    https://ao.com/product/seb600fp-stoves-electric-single-oven-stainless-steel-22495-45.aspx and as you can see there is a size diagram.

    Thanks - we have a dying Whirlpool-AKP745IX -
    That appears to be 564mm deep
  • cranford
    cranford Posts: 797 Forumite
    Tenth Anniversary 500 Posts Name Dropper
    According to the diagram on AO it is actually 54.2 deep and needs a 55 recess. The 56.4 depth probably include the facia. There also appears to be a decent cut out for the hob connection and it also states that it is 16amp needing hardwiring by an expert.
  • 50Twuncle
    50Twuncle Posts: 10,763 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    Does AO fitting not include hardwiring then ?
  • cranford
    cranford Posts: 797 Forumite
    Tenth Anniversary 500 Posts Name Dropper
    Yes it does but its about £100 with disposal and taking packing away.
    Currys have half price fitting on some ovens at the moment.
  • onomatopoeia99
    onomatopoeia99 Posts: 7,160 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    cranford wrote: »
    it also states that it is 16amp needing hardwiring by an expert.
    Wiring a new cooker into an existing cooker circuit outlet is about as hard as wiring a plug. Well, exactly as hard, as it's the same three conductors.

    Wondering what sort of "expert" it requires?

    Installing a new circuit for is another matter.
    Proud member of the wokerati, though I don't eat tofu.Home is where my books are.Solar PV 5.2kWp system, SE facing, >1% shading, installed March 2019.Mortgage free July 2023
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599.1K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.