We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
NEFF dishwasher

missile
Posts: 11,761 Forumite


in Techie Stuff
NEFF integrated dishwasher has stopped working today = error E15. I believe this is due to the outlet pipe is clogged with food waste / grease. Could be down to my OH who despite my repeated requests, never rinses food off dishes before putting them into the dishwasher.
I have removed the machine and stripped the machine best I can but can't get to the outlet pipe.
I have put in some Mr Muscle in the hope it may clear the blockage?
Any advice please?
I have removed the machine and stripped the machine best I can but can't get to the outlet pipe.
I have put in some Mr Muscle in the hope it may clear the blockage?
Any advice please?
"A nation's greatness is measured by how it treats its weakest members." ~ Mahatma Gandhi
Ride hard or stay home :iloveyou:
Ride hard or stay home :iloveyou:
0
Comments
-
have a look at this https://www.youtube.com/watch?v=KiB8QzDlq5Q
If the bosch is extremely similar, then this may help too https://www.youtube.com/watch?v=amtrYcx_3hs
https://www.youtube.com/watch?v=N0LyG-U4XqE
Just a word of caution too, now you have put caustic chemicals in the water that may not be draining, just be careful not to get it in your eyes and wash slashes off your hands
Also if it is a blockage, you can try net curtain wire (curly spring stuff coated in white plastic) as a snake to dislodge gunk around pipe bends.0 -
Hi, Thanks for your help. I managed to reset switch using this method Unfortunately it faults to same code again.
Great end to 2017"A nation's greatness is measured by how it treats its weakest members." ~ Mahatma Gandhi
Ride hard or stay home :iloveyou:0 -
NEFF integrated dishwasher has stopped working today = error E15. I believe this is due to the outlet pipe is clogged with food waste / grease.
Any advice please?
Friend had this exact same problem about 9? months ago. The E15 error code means the ‘flood protection’ device in the dishwasher has been triggered. Was there water in the base of the machine when you opened it? There is a way of resetting it or as my friend did had the switch replaced.0 -
Hi, Thanks for your help. I managed to reset switch using this method Unfortunately it faults to same code again.
Great end to 2017
So the base keeps filling up, rather than the switch? so probably as they say leak or overflow. Doubt a faulty switch would be reset by tuning your washer 45 degrees, and you should have water on the floor too.
Although in German, this show you how to replace the outlet seal
https://www.youtube.com/watch?v=OliiWxORUJA
An English version for a thick seal https://www.youtube.com/watch?v=tUQPEPgPWMI
If you are looking for some dye, some dark colour kool-aid and white paper towels could be your answer0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 349.7K Banking & Borrowing
- 252.6K Reduce Debt & Boost Income
- 452.9K Spending & Discounts
- 242.7K Work, Benefits & Business
- 619.4K Mortgages, Homes & Bills
- 176.3K Life & Family
- 255.6K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 15.1K Coronavirus Support Boards