📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Fridge packed in

Options
My under counter fridge has stopped working, I have taken it out and cut the wire where it connected into the fridge, theres still lots of length left.

I plan to get a new fridge today... are they easy to hook up?

If so, what do I do? Is it much like wiring up a plug?

Comments

  • McKneff
    McKneff Posts: 38,857 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    A new fridge just plugs in to a socket. As in the old fridge just pull the plug out of the socket
    So not sure what you mean
    make the most of it, we are only here for the weekend.
    and we will never, ever return.
  • Zola. wrote: »
    My under counter fridge has stopped working, I have taken it out and cut the wire where it connected into the fridge, theres still lots of length left.

    I plan to get a new fridge today... are they easy to hook up?

    If so, what do I do? Is it much like wiring up a plug?
    :eek: Surely you didn't just cut the cable with it still plugged in?

    As above, a new fridge will just plug back into a standard socket. Or are you describing something completely different to a normal fridge?
  • Zola.
    Zola. Posts: 2,204 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    The lead is connected up to a dual switch box at the wall, one for the microwave, and one for the fridge.

    The end of the lead that was connected into the fridge I cut, as I couldn't get it out from whatever way it was wired in to the fridge.
  • I see, so do you mean that the lead went from the fridge, up through the counter somehow and plugged in at the wall? If so, you will eventually* cut off the plug from the new fridge close to the plug end (assuming it's a moulded plug), feed the cable through the route that leads to the socket and buy and fit a new plug to the end of the cable. Take care to fit the correctly rated fuse.

    * I say eventually because first you should run the new fridge for a while with an extension lead to make sure it's working correctly. If you cut off and replace the plug straight away and it doesn't work, you might have difficulty returning it.

    Stating the obvious, but don't do any of this if you haven't got the right tools or are not sure what you're doing. There are plenty of good instructional videos on YouTube if you need them.
  • Silvertabby
    Silvertabby Posts: 10,153 Forumite
    10,000 Posts Eighth Anniversary Name Dropper Photogenic
    Have you tested the fuse/socket before running out to buy a new fridge?

    Try fitting a new plug to your old fridge, then plug it into a different socket.
  • Zola.
    Zola. Posts: 2,204 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    edited 10 December 2017 at 10:19PM
    Got it sorted!

    The old flex cable I wired into a extension socket from Screwfix, then plugged the fridge into that. Means I dont void the warranty on the fridge! All fitted well! Same fuse ratings etc.

    Have to leave all the food outside again in bags as the fridge apparently needs 24 hours to chill on its own before use!

    Thankfully its cold outside..
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599.2K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.