We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

Tumble dryers

I'm looking at buying a dryer for my new house.Looking for opinions on what's better the condenser or vented type?
Thanks
«1

Comments

  • glentoran99
    glentoran99 Posts: 5,825 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker Debt-free and Proud!
    Depends do you want to drill holes in your walls to vent the tumble dyer?
  • thescouselander
    thescouselander Posts: 5,547 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    In my experience vented dryers service faster than condensing ones so that's what I'd recommended. Also condensing dryers never seem to completely dry the air which then leads to condensation in the room where the dryer is situated.
  • Jonesya
    Jonesya Posts: 1,823 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    If you're going to be using it regularly then look at the new heat-pump condenser dryers - they're much more energy efficient that conventional condenser and vented dryers.
  • Ebe_Scrooge
    Ebe_Scrooge Posts: 7,320 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    I have to agree with the above. Purely subjective ... but in my experience, vented dryers seem to dry quicker and more thoroughly than condensing ones. Plus they're cheaper to buy. Plus there are less gubbins inside to go wrong.

    Yes, you have the hassle of sorting out the vent hole in the wall - but that's a once-only job. As long as you're in the house, even if you need to buy a new dryer down the line, odds on you can use the same vent hole.

    Just my opinion.
  • theonlywayisup
    theonlywayisup Posts: 16,032 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    Have you thought about a heat pump dryer?
  • Lauralou79
    Lauralou79 Posts: 268 Forumite
    edited 13 June 2017 at 9:34PM
    To be honest I can't afford the most high tec or expensive. Theres only two of us so it won't be constantly used. Can facilitate a vented one of needs be. Just wondered what was better
  • DigForVictory
    DigForVictory Posts: 12,226 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    I prefer the condenser type as the hole in the wall let other things in as well as hot wet air out.

    However, with three lads there's a lot of laundry...
  • trailingspouse
    trailingspouse Posts: 4,046 Forumite
    Part of the Furniture 1,000 Posts
    Condenser dryer every time - it means your tumble dryer can go anywhere with a power socket and doesn't need to be vented through an outside wall. Keep the filter clean and empty the reservoir as necessary.
    No longer a spouse, or trailing, but MSE won't allow me to change my username...
  • Grenage
    Grenage Posts: 3,222 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    We have a heat pump model, very pleased with the rubbing costs and results.
  • getmore4less
    getmore4less Posts: 46,882 Forumite
    Part of the Furniture 10,000 Posts Name Dropper I've helped Parliament
    Heat pump will pay for itself in just a few years, there are relatively affordable models now.

    We went for the Grundig with 5y warranty.

    price watch for a while and use pricespy,
    https://pricespy.co.uk/category.php?k=514

    the prices change by £100s on a lot of models depending on which sale cycle they are in.

    our purchase was £400 but the price goes up to £550+ at times

    The other advantage it can go just about anywhere only needs a power source, they do have a plumb in option for the water waste.

    Speed of drying is not an issue if you plan. still only take 2 mins of real time, one to load and one to unload.

    the 2 things to look at on condensers are the energy and the condensing efficiency(the amount of moisture they vent into the room)

    For the standard 160 cycles typical HP will be around 250kwh regular condenser/vented 600kwh


    start with Beko and price/performance/brand against them.
    http://www.beko.co.uk/appliances/laundry/tumble-dryers

    Grundig are Beko+ with 5y warranty.


    It might be that for you use, only 2 and if you can get you drying outside a lot of the year the saving per cycle may not be enough to justify a HP.

    £150-£200 will buy a decent dryer a HP will be up around £300-£400 and up from there.

    don't scrimp on the size go 8KG min to take a full double set of bedding.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 354.3K Banking & Borrowing
  • 254.4K Reduce Debt & Boost Income
  • 455.4K Spending & Discounts
  • 247.2K Work, Benefits & Business
  • 603.9K Mortgages, Homes & Bills
  • 178.4K Life & Family
  • 261.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.