We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
The MSE Forum Team would like to wish you all a Merry Christmas. However, we know this time of year can be difficult for some. If you're struggling during the festive period, here's a list of organisations that might be able to help
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Has MSE helped you to save or reclaim money this year? Share your 2025 MoneySaving success stories!
Replacement glass front door
Supernova
Posts: 735 Forumite
Hi guys,
21 x 19" glass in upper ordinary wooden door is cracked. Is frosted etc.
Any ideas how much it should cost to replace on a call out. Or is it DIY-able?
Thanks!
S
21 x 19" glass in upper ordinary wooden door is cracked. Is frosted etc.
Any ideas how much it should cost to replace on a call out. Or is it DIY-able?
Thanks!
S
0
Comments
-
single or double glazed? DG sealed unit about £20Mr Generous - Landlord for more than 10 years. Generous? - Possibly but sarcastic more likely.0
-
Mr.Generous wrote: »single or double glazed? DG sealed unit about £20
OK thanks.
Quotes seem to be about £200 fitted. I'm told it's a non-standard size so would need to be ordered for 5 days after precise measurement. or done by emergency glazier.
Is there an easy DIY solution?
Cheers
S0 -
If it is a single pane of glass and you have a Glass shop supplier near you then take the measurements to them, they will cut to any size you require.
Then {if there is wooden beading holding the cracked pane in just ease that off, clean around the area, insert new pane then {CAREFULLY} pin the beading back into place {Job done}
If the pane has putty holding it in just remove the putty, clean up the frame, inset new glass then putty it.
IMO any basic d.iy.er should be able to do a job like that in 30 mins {check on you tube for instructions}:0)0 -
Who did you ask to quote? £200 for a simple replacement piece of single glazing sounds very high to me. The idea that it's "non-standard size" seems bizarre. I wouldn't expect a glass merchant to have stocks of pieces of glass already cut to size, I'd expect them to cut it as required.Quotes seem to be about £200 fitted. I'm told it's a non-standard size so would need to be ordered for 5 days after precise measurement. or done by emergency glazier.
Is there an easy DIY solution?
Cheers
S
I'd get more quotes if I were you. Look for traditional glaziers not window or double glazing installers. If there's a place locally that offers a glass cutting service, ask there.0 -
If it is a single pane of glass and you have a Glass shop supplier near you then take the measurements to them, they will cut to any size you require.
Then {if there is wooden beading holding the cracked pane in just ease that off, clean around the area, insert new pane then {CAREFULLY} pin the beading back into place {Job done}
If the pane has putty holding it in just remove the putty, clean up the frame, inset new glass then putty it.
IMO any basic d.iy.er should be able to do a job like that in 30 mins {check on you tube for instructions}:0)
OK thanks will consider that. Hopefully I will get the measurements right.0 -
Who did you ask to quote? £200 for a simple replacement piece of single glazing sounds very high to me. The idea that it's "non-standard size" seems bizarre. I wouldn't expect a glass merchant to have stocks of pieces of glass already cut to size, I'd expect them to cut it as required.
I'd get more quotes if I were you. Look for traditional glaziers not window or double glazing installers. If there's a place locally that offers a glass cutting service, ask there.
Asked a 24 hour emergency glazier and a local glass shop (yes, they are window installers). The inside frame seems to be 553 x 497 m, so hopefully a few mm shorter will be accurate.
Just been quoted £31.66 for 6mm toughened glass plus 20% if opaque. Not sure if mine is 6mm. Needs to be sent away for 3-4 days to be toughened apparently.
Do I need toughened glass by law?
S0 -
Probably cheaper to buy a new door.make the most of it, we are only here for the weekend.
and we will never, ever return.0 -
Actually, just had another quote for about £140 fitted on Monday...
I'm in that there London btw ;-)0 -
Actually, just had another quote for about £140 fitted on Monday...
I'm in that there London btw ;-)
That's sounds a bit more reasonable. If the glass is £32 as you said above, then that covers £100 for labour and a few quid for sundries like putty etc. If they came out to measure and quote then I suppose that's not bad for that London.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 352.9K Banking & Borrowing
- 253.9K Reduce Debt & Boost Income
- 454.7K Spending & Discounts
- 246K Work, Benefits & Business
- 602.1K Mortgages, Homes & Bills
- 177.8K Life & Family
- 259.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16K Discuss & Feedback
- 37.7K Read-Only Boards