We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Electric oven nightmare
Options

Nikiya
Posts: 552 Forumite


in Techie Stuff
I’ve had an Ariston cooker with electric oven for 11 years. It has not been used much and looks new. A year ago, the oven started making my circuit breaker jump. At the beginning, it happened after half an hour or so, then more erratically until it got to a point where I could not turn it on because the breaker would jump.
I called the specialists and they said it was humidity in the upper element. Strange, since I had been using the cooker for 10 years, but I bought a new element and had it replaced. It worked fine but now it started having the same problem. The first time I could turn the breaker back on and finish my cooking. The second time it would not work again.
I have not been able to contact the specialists but managed to contact the dealer who sold me the part and he suggested me to buy another one. For various reasons, that is out of the question.
He says the element can "absorb" humidity if not used for some time or stored, for instance, in a garage. I have not used the oven for a few months but it is certainly NOT in a garage and I have not had any humidity in my kitchen. Besides, why does that not happen with the lower element?? And how comes the oven works at 180ºC for nearly an hour before the "humidity" triggers the emergency cut or whatever that is??
Any suggestions as to how I can resolve this or what on earth might be happening?
Many thanks!
I called the specialists and they said it was humidity in the upper element. Strange, since I had been using the cooker for 10 years, but I bought a new element and had it replaced. It worked fine but now it started having the same problem. The first time I could turn the breaker back on and finish my cooking. The second time it would not work again.
I have not been able to contact the specialists but managed to contact the dealer who sold me the part and he suggested me to buy another one. For various reasons, that is out of the question.
He says the element can "absorb" humidity if not used for some time or stored, for instance, in a garage. I have not used the oven for a few months but it is certainly NOT in a garage and I have not had any humidity in my kitchen. Besides, why does that not happen with the lower element?? And how comes the oven works at 180ºC for nearly an hour before the "humidity" triggers the emergency cut or whatever that is??
Any suggestions as to how I can resolve this or what on earth might be happening?
Many thanks!
0
Comments
-
There are usually two elements in an oven, it might be the second one that has failed a year after the first was replaced.0
-
Unless you can check the resistance in the elements etc. the cheapest option is probably just replace the elements yourself.
If you cook in the kitchen there will be humidity produced.
Could be a problem with the breaker. Is it properly rated for a double cooker?
I had to have another supply run in for an induction hob because it was a bit close to the max limit with a double oven also.Censorship Reigns Supreme in Troll City...0 -
In my experience humidity in elements causes a trip as soon as they turn on, not after some considerable time. I suspect the fault is elsewhere.Tall, dark & handsome. Well two out of three ain't bad.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 351K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244K Work, Benefits & Business
- 599K Mortgages, Homes & Bills
- 176.9K Life & Family
- 257.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards