LED strip discolouration

330 Posts


I recently installed a considerable amount of LED strip into lighting recesses around a bedroom but just a few weeks on it started to discolour badly. It was a warm white colour but sections of it began to go very yellow, usually a group of 3 individual LEDs together, and it was noticeably worse at the beginning of each strip where the power was connected, with 2 or 3 groups of LED all glowing yellow.
I did a little research and it seems that the silicone plastic coating that makes it waterproof is prone to discolouration, but this is not what has happened in this instance - I stripped it all out and found that the individual LEDs that were glowing yellow had developed a brown tiny dot in the middle.
I have now replaced it all with non-waterproof, bare LED-type but I'm curious if this has happened to anyone else and if a cause was identified as I am now hoping it doesn't happen again. I'm hoping it was just a dodgy batch of LED strip.
I did a little research and it seems that the silicone plastic coating that makes it waterproof is prone to discolouration, but this is not what has happened in this instance - I stripped it all out and found that the individual LEDs that were glowing yellow had developed a brown tiny dot in the middle.
I have now replaced it all with non-waterproof, bare LED-type but I'm curious if this has happened to anyone else and if a cause was identified as I am now hoping it doesn't happen again. I'm hoping it was just a dodgy batch of LED strip.
0
This discussion has been closed.
Latest MSE News and Guides
Replies
Dodgy LEDs
LEDs need some way to get rid of heat.
Cheaper waterproof just cover everything in silicon, which is a warm blanket for electronics.
the diodes are burning out.
I have an RGB one, and after not too much use a lot of the diodes have started to degrade. The blue sections are first to go, followed by the green. The reds always outlive the rest.
not bad start
Assuming you don't want to do any soldering yourself, the above would work, plug and play, being non waterproof they should get enough ventilation to not burn out.
LED hut has been around for a while as well, so any problems and they should sort it out.
if someone put a £125 5m LED around their daughters wardrobe I would have a laugh.
the cheaper ones might not have the best colours and might only last a few years, but its a wardrobe.
I'd rather have 6 £20 rolls and replace them every year (my cheap ones are currently on their 3rd year) than 1 £125 one.
@paulpud So long as you don't go mega cheap they should be fine. Go for the ones martinsurrey suggested. If they fail too soon then LEDHut will likely replace them anyway.
@ryder72 Nobody is going to spend £100's on a kids wardrobe, that is nonsense!
I appreciate you wont and many cant or wont but there are people who either have too much money and dont care or care about getting quality and are willing to pay for it. You are entitled to your opinion but not to be judgemental
he was about as judgmental as you saying "anything half decent is going to cost upwards of £125 for a 5m roll".
This is a money saving site, OP clearly self fitted a cheap roll, and is not interested in the money no-option branded, bells whistles options.
Scaring them that anything that doesn't cost and arm and a leg is useless, is not helpful, and is in fact wrong.
You can get a £20k TV, that doesn't mean a £500 one isn't half decent.