📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

New Kitchen, how much?

Options
15681011

Comments

  • System
    System Posts: 178,351 Community Admin
    10,000 Posts Photogenic Name Dropper
    'Fraid I'm going to come in dearer than yours did glasgowdan:(.

    I've just checked out that website you gave. They're not bad-looking kitchens - but I couldn't see any that are solid wood. They all say things like "veneered centre panel".

    what's the need for solid wood?
    some of the most expensive kitchens I've seen are veneered panels - solid wood doesn't mean quality anymore than veneer means poor
    This is a system account and does not represent a real person. To contact the Forum Team email forumteam@moneysavingexpert.com
  • Doozergirl
    Doozergirl Posts: 34,076 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    the_r_sole wrote: »
    what's the need for solid wood?
    some of the most expensive kitchens I've seen are veneered panels - solid wood doesn't mean quality anymore than veneer means poor

    Indeed. I'm pretty sure the centre panels are veneered as the larger but thinner centre panels of solid wood can be prone to warping? Same reason we don't generally make the carcasses from solid wood either.
    Everything that is supposed to be in heaven is already here on earth.
  • If you're spending more than 5K on a kitchen, you've done it hopelessly wrong!
    Rough guide, for decent quality:

    Units 1000
    Worktops 500
    Appliances, sink, taps etc. 1500
    Labour 1000 (5 days @ 200/day)
    That leaves 1 grand to play with!
  • glasgowdan
    glasgowdan Posts: 2,968 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    You can spend more if you want to, of course, but that extra money won't be working for you.

    Trust me, these units from that website are quality. My joiner fits loads of kitchens and says they're the best ones he uses, and he's a personal mate with no incentive to lie. He organised a plumber and electrician, I organised the tiler/decorator. He needed the money for the units upfront, I paid for the appliances myself and gave him a list of their sizes before he ordered the kitchen.

    Any all-trades company that offers the full package adds a whack of money on for the privilege.
  • always_sunny
    always_sunny Posts: 8,314 Forumite
    In my ongoing quest for a new kitchen (low priority project)... how do I go about getting a quote?
    Say I have decided which kitchen I'd like, did you just get tradies in to quote? Did you use the one with from the kitchen supplier? I'd like to also redo my ceiling and floor, did you do it before or after?

    Ta
    EU expat working in London
  • Saverule
    Saverule Posts: 65 Forumite
    Sixth Anniversary 10 Posts Name Dropper Combo Breaker
    We're in the same position, looking to get our kitchen done.
    Wren-kitchens offer a price estimator, for a 12 piece with Neff appliances (Hob, Oven, Extractor and Dishwasher) it came to roughly £7,500 including Dry, Electrical and Gas installation.
    If you're willing to do the hard work yourself and feel capable, you can make super savings. My Dad installed his kitchen for £3000, it's huge, modern and luxurious. I wish he'd do it for me lol!
  • glasgowdan wrote: »
    You can spend more if you want to, of course, but that extra money won't be working for you.

    Trust me, these units from that website are quality. My joiner fits loads of kitchens and says they're the best ones he uses, and he's a personal mate with no incentive to lie. He organised a plumber and electrician, I organised the tiler/decorator. He needed the money for the units upfront, I paid for the appliances myself and gave him a list of their sizes before he ordered the kitchen.

    Any all-trades company that offers the full package adds a whack of money on for the privilege.

    I have just had a DIY-kitchen installed and everything Glasgow Dan says is correct. They were first class. I paid a lot less than it would have cost at Howdens / Benchmarx for their attempt at an equivalent kitchen - but it was better quality. They did make a couple of mistakes in the order - but it was a big order and quite complex so I was expecting that. All mistakes were rectified quite quickly and without quibble. I can't recommend them enough. I was a bit concerned before using them but now I have a couple of friends ordering kitchens from them and I'm advising them. I would definitely use them again. My kitchen units cost £9k but it was a kitchen utility and island and was large with lots of curved cupboards and drawers so don't let that price put you off if you are looking for something smaller.

    Good luck all!!!
  • cddc
    cddc Posts: 1,164 Forumite
    Part of the Furniture Combo Breaker
    Saverule wrote: »
    We're in the same position, looking to get our kitchen done.
    Wren-kitchens offer a price estimator, for a 12 piece with Neff appliances (Hob, Oven, Extractor and Dishwasher) it came to roughly £7,500 including Dry, Electrical and Gas installation.
    If you're willing to do the hard work yourself and feel capable, you can make super savings. My Dad installed his kitchen for £3000, it's huge, modern and luxurious. I wish he'd do it for me lol!

    See the 15 page thread on the Consumer Rights board before going down that route.....
  • Thanks cddc for the heads up, won't be purchasing from them anyway. I'm a bit of a snob...
    I did like using their estimator for a 'what to expect figure.' though.

    We'll be using a reputable local company, that we've had personal recommendations for and have seen the finished product (3 different homes).
  • Just another vote for the diykitchens website that Glasgowdan recommends. We've used them on kitchens in our current and previous house and saved a fortune on getting it elsewhere. The quality, in my opinion, far exceeds any of the other normal brands. if you visit their showroom (which I highly recommend) in Yorkshire they have a bunch of base units from various vendors side by side so you can see the difference in build quality.

    We fitted ourselves, well my other half did, although we used a local company to do the worktops and our regular carpenter to cut the coving/cornicing and the other tricky bits. The tough bit is planning it. I'm sure a decent local fitter would be willing to work with you if you wanted to use diy kitchens.

    If you like quality white goods for your kitchen but don't like spending top dollar (as you should reading a site like this!) I highly recommend the Miele outlet store in Abingdon, you can get 40-50% off list price.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599.2K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.