We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
insulation for a attic room
Options

jim-jim
Posts: 127 Forumite
Hi there,
we live in a 1900 miners terraced house with the attic as a room. This is not a conversion, as all the houses on the block are the same.
How can we insulate up there? There are 2 velux windows on either side of the roof, no access to the eaves and no loft space. We had the tiles replaced about 8 years ago, but not convinced any insulation was or could have been used.
All the brick and plaster in the house has been mixed with coal dust (all black) so if we took the ceilings/sloping roof wall off the mess would be messy!!
Any ideas
Many thanks x
we live in a 1900 miners terraced house with the attic as a room. This is not a conversion, as all the houses on the block are the same.
How can we insulate up there? There are 2 velux windows on either side of the roof, no access to the eaves and no loft space. We had the tiles replaced about 8 years ago, but not convinced any insulation was or could have been used.
All the brick and plaster in the house has been mixed with coal dust (all black) so if we took the ceilings/sloping roof wall off the mess would be messy!!
Any ideas
Many thanks x
0
Comments
-
the best solution is to drop the ceilings and insulate between the roof rafters - you potentially could have done it from the outside when you had the tiles off (presuming you are in england) but you've missed that boat.
It's going to be messyThis is a system account and does not represent a real person. To contact the Forum Team email forumteam@moneysavingexpert.com0 -
The roof should have been insulated when the tiles were replaced - an application should have been made to building control. Presumably it wasn't, but that is what building regs are there for, really; to ensure appropriate upgrades when you carry out certain works.
The plaster should come off inside and insulation placed between the rafters. That is the proper and warmest way of doing it.
A less messy way might be to apply insulated plasterboard to what is already there, but you have to be sure of hitting all the rafters. It probably won't cost any less than doing it properly as insulated plasterboard is expensive and you won't use the same thickness as you would if insulating between rafters and it needs to be skimmed either way.Everything that is supposed to be in heaven is already here on earth.
0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 351.1K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244.1K Work, Benefits & Business
- 599K Mortgages, Homes & Bills
- 177K Life & Family
- 257.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards