New Cooker Hood

2010

I`ve removed my old cooker hood which was connected to the supply by a 3 pin plug just above the kitchen units.
The new cooker hood comes "hard wired".
What are my options for fitting it to the supply?

Silver-Surfer_2

Fused connection unit.

http://www.toolstation.com/shop/Electrical/d190/White+Wiring+Accessories/sd2633/Fused+Spur+13A/p44125

2010

Does the fused spur replace the 3 pin socket cover to pick up the main supply.
And also connect up the wires from the cooker hood into the spur?

phill99

Or just put a plug on the cable.

molerat

Hard wired as in connection terminals inside the unit or comes with flex with no plug on ?

Does the fused spur replace the 3 pin socket cover to pick up the main supply.
And also connect up the wires from the cooker hood into the spur?

Yes, they come with a knockout on the bottom for the wire to come out of.

2010

molerat wrote: »

Hard wired as in connection terminals inside the unit

Yes.

So all the wires go into the fused spur.

i.e. three from the main supply and three from the cooker hood/extractor.