We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide
Low pressure in new bathroom
Comments
-
They are correct by what some of the latest Mira instructions say
I've never noticed a difference between the manufacturer way and just turning it on, always leave it down for a few minutes until all the air is out the heat exchangerHi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure0 -
southcoastrgi wrote: »An electric shower runs off of the cold water main & doesn't require any buttons to be pressed or setting up
This is completely false
from mira ;
The Mira Advance ATL will adapt it's settings for the individual supply
conditions and store this information in it's main memory (during manufacture, this
information is factory set using ideal conditions). On initial installation, the unit needs
to "learn" about the site conditions and does so during the commissioning cycle.
It is important that the unit is commissioned correctly otherwise an error condition
may occur. Once set, the unit constantly updates it's memory with information about
the site conditions to optimize the shower's performance. This is stored once the
Start/Stop button is pressed whilst the shower is running.
Make sure the double pole switch is off.
5. Set the Temperature control dial to the position required for the correct
temperature as shown in the following table.
6. Switch on the double pole switch and check the blue Start/Stop button is lit.
Flow
Start/Stop
17
7. Within 30 seconds, push and hold down the Flow and Start/Stop buttons at
the same time.
8. On the long beep, release the Start/Stop button. On the short beep, release
the Flow buttonEven a stopped clock tells the right time twice a day, and for once I'm inclined to believe Withnail is right. We are indeed drifting into the arena of the unwell.0 -
southcoastrgi wrote: »I have no idea what you are talking about
Err call a plumber then, you are going to need one.I do Contracts, all day every day.0 -
Marktheshark wrote: »Err call a plumber then, you are going to need one.
ok thanx I'll bare that in mindI'm only here while I wait for Corrie to start.
You get no BS from me & if I think you are wrong I WILL tell you.0 -
Out of interest what Brand is the shower? Would a power shower help increase the pressure? A quicker / cheaper solution to this problem is to purchase a special low pressure. It will work better than a standard shower head as it is designed to perform better in low water pressure situations.0
-
southcoastrgi wrote: »ok thanx I'll bare that in mind
:beer::money::beer::DNever, under any circumstances, take a sleeping pill and a laxative on the same night.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 354.3K Banking & Borrowing
- 254.4K Reduce Debt & Boost Income
- 455.4K Spending & Discounts
- 247.3K Work, Benefits & Business
- 604K Mortgages, Homes & Bills
- 178.4K Life & Family
- 261.5K Travel & Transport
- 1.5M Hobbies & Leisure
- 16K Discuss & Feedback
- 37.7K Read-Only Boards