We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

Poor Shower presssure

Our problem is that we have 4 bathrooms in our house and previous owner had installed a new combi boiler 38CDi.
But if we use a tap in kitchen the shower upstairs literally stops.It is even worse when two people use showers at the same time.
What would be the best and cheapest option to get some water flowing in at least two showers at the same time?
The water pressure at mains is very good.
Somebody adviced to go for Megaflow-but few others had said there are cheaper options and we could get water heated by combi to feed into hot water cylinder etc and get effective flow in the showers upstairs.
And how much would I be looking at to spend?We are based in Berkshire.

Comments

  • combi heater would be a good choice.
  • Ruski
    Ruski Posts: 1,628 Forumite
    Megaflow type would be the best option, but there are other options available such as Alpha's flowsmart system.

    Either way you're going to have to chuck money at the problem - the only 'cheap' way to sort out your problem is either electric showers or take it in turns.

    HTH

    Russ
    Perfection takes time: don't expect miracles in a day :D
  • 11fernsroad
    11fernsroad Posts: 236 Forumite
    Part of the Furniture 10 Posts Combo Breaker
    Ruski wrote: »
    Megaflow type would be the best option, but there are other options available such as Alpha's flowsmart system.

    Either way you're going to have to chuck money at the problem - the only 'cheap' way to sort out your problem is either electric showers or take it in turns.

    HTH

    Russ
    Thanks a lot
    We had a plumber come in today who said the present Worcester 38CDi (3 years) is not adequate to supply an unvented indirect cylinder,and hence needs new combi as well !!!
    He said the present combi is just adequate enough to heat up the radiators in all rooms and it cant take any more strain.
    We tend to take showers in the morning and use radiators in the evening(that too in winter only)
    Any advice?
  • Hoploz
    Hoploz Posts: 3,888 Forumite
    My plumber said combis are only really suitable for small homes - which your problem seems to agree with. So consider a different system rather than another combi would be my suggestion
  • Look at using a accumulator. If you have room for a cylinder fit this instead.
    Try gah.co.uk
  • keith969
    keith969 Posts: 1,575 Forumite
    Part of the Furniture
    I have a pressurised unvented system and with two showers on upstairs there is hardly any loss in pressure if the hot tap is turned on in the kitchen. Just lots of lovely hot water.

    Only drawback is that not all plumbers are qualified to work on such systems if they go wrong...
    For every complex problem there is an answer that is clear, simple and wrong.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 354.3K Banking & Borrowing
  • 254.4K Reduce Debt & Boost Income
  • 455.4K Spending & Discounts
  • 247.3K Work, Benefits & Business
  • 604K Mortgages, Homes & Bills
  • 178.4K Life & Family
  • 261.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.