📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Labour cost for fitting laminate ?

Options
2»

Comments

  • Anyone can lay laminate badly.
  • Ruski
    Ruski Posts: 1,628 Forumite
    Hallways are a nightmare and need to be done properly, 2 men @ 150 per day is more than good value.

    HTH

    Russ
    Perfection takes time: don't expect miracles in a day :D
  • AlexMac
    AlexMac Posts: 3,064 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Whoever fits it, suggest they 'float' it under the architraves around doorways by cutting a horizontal slice off the bottom of the architraves and sliding the laminate in. This looks much neater than fitting fiddly little bits of scotia round the projecting moulding, or, even worse, cutting the laminate short of it and filling the gap with mastic as I have seen done.
    Its also really easy; just put a bit of laminate on the floor as a height guide and use an ordinary hand saw.

    I'm no carpenter but I did a DIY fitting job on some mid-price B&Q laminate the other day and it was incredibly easy to lay- just clicked into place without the need for tapping in. A room only took 3-4 hours and even without removing the skirtings I managed to do it sufficiently neatly that I didn't have to bother with scotia; no-one ever notices the tiny expansion gap if the line is straight!
  • Reece_
    Reece_ Posts: 291 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    AlexMac wrote: »
    Whoever fits it, suggest they 'float' it under the architraves around doorways by cutting a horizontal slice off the bottom of the architraves and sliding the laminate in. This looks much neater than fitting fiddly little bits of scotia round the projecting moulding, or, even worse, cutting the laminate short of it and filling the gap with mastic as I have seen done.
    Its also really easy; just put a bit of laminate on the floor as a height guide and use an ordinary hand saw.

    I'm no carpenter but I did a DIY fitting job on some mid-price B&Q laminate the other day and it was incredibly easy to lay- just clicked into place without the need for tapping in. A room only took 3-4 hours and even without removing the skirtings I managed to do it sufficiently neatly that I didn't have to bother with scotia; no-one ever notices the tiny expansion gap if the line is straight!

    Whilst this is very true and the way it should be done, I wouldn't think of hiring a tradesman that needed this suggested to them, first sign of cutting around architraves and door frames they'd be gone, real amateur even below DIY standard. Certainly do not accept any excuses as to this being in any way okay.

    As much as £600 sounds steep , I agree with Russ, hallways can be a nightmare, certainly one containing 7 doors! Remember that those 7 doors could well need the bases shaved down once the laminate is installed.
    Obviously get more quotes but a hallway with that many door frames in, really needs to be done right, go too cheap and get a cowboy who cuts around all the frames etc and it will look a mess.
    The comment regarding £15 per square metre costing more than the laminate is completely irrelevant. You can buy a cheap hollow core door for £10, doesn't mean you should expect it fitted for less.
  • AlexMac wrote: »
    Whoever fits it, suggest they 'float' it under the architraves around doorways by cutting a horizontal slice off the bottom of the architraves and sliding the laminate in. This looks much neater than fitting fiddly little bits of scotia round the projecting moulding, or, even worse, cutting the laminate short of it and filling the gap with mastic as I have seen done. !

    Undercutting the door frames and architraves is the ONLY correct way to do it. Any so-called fitter who doesn't do this is crap.
  • deejaybee
    deejaybee Posts: 925 Forumite
    Part of the Furniture 500 Posts Name Dropper
    Thanks for further feedback all...

    I haven't updated before cos laptop died, and is in for hd replacement - using better halfs's iPad which is a struggle !

    Anyway, I have had a price off a highly recommend handyman - reckons will take max 2 days on his own - £280, happy days.
  • Please note that you do not shape around door ways because that just looks rude. You install the boards underneath the the doorways
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.